DQ250 CXX Read/Write

Pages: [1]

« previous next »

Author

Topic: DQ250 CXX Read/Write (Read 4349 times)

Dave9n3

Sr. Member

Karma: +27/-0
Offline

Offline

Posts: 289

	DQ250 CXX Read/Write « on: July 28, 2020, 03:12:34 PM »

Hi,

Currently trying to read original files to make backup of my DQ250 CXX using mini dsg reader.

I’ve created my own adapter to plug direct to the ECU. I am able to ECU ID just fine no issues but when I try to read flash it fails to initialise. I presume the mini DSG reader ID’s using the K line rather than CAN, which leads me to wonder if I need a termination resistor

Does anyone know if I need a CAN termination resistor adding between HI and LO to make it work?


	Logged

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	Re: DQ250 CXX Read/Write « Reply #1 on: July 28, 2020, 11:57:59 PM »

Dont waste your time with the mini dsg reader aka frieling racing spi wizard

Go with the pcmflash and module 58


	Logged

Dave9n3

Sr. Member

Karma: +27/-0
Offline

Offline

Posts: 289

	Re: DQ250 CXX Read/Write « Reply #2 on: July 29, 2020, 12:28:09 AM »

Quote from: aef on July 28, 2020, 11:57:59 PM

Dont waste your time with the mini dsg reader aka frieling racing spi wizard

Go with the pcmflash and module 58

Might have to, presume PCM flash will read, write and checksum over OBD? I don’t really intend on tuning any others. This is for my brothers car hence I bought the cheapest option thinking i’d only need it once. PCM flash could be useful in the future tho.


	Logged

jochen_145

Full Member

Karma: +9/-4
Offline

Offline

Posts: 177

	Re: DQ250 CXX Read/Write « Reply #3 on: July 31, 2020, 11:44:39 PM »

Quote from: Dave9n3 on July 28, 2020, 03:12:34 PM

Does anyone know if I need a CAN termination resistor adding between HI and LO to make it work?

If you got a point-to-point connection between DSG and flash-tool, you need to terminate the CAN


	Logged

cherry

Sr. Member

Karma: +26/-2
Offline

Offline

Posts: 260

	Re: DQ250 CXX Read/Write « Reply #4 on: August 01, 2020, 01:48:49 AM »

Cxx use only k-line for read/write.


	Logged

Dave9n3

Sr. Member

Karma: +27/-0
Offline

Offline

Posts: 289

	Re: DQ250 CXX Read/Write « Reply #5 on: August 01, 2020, 01:50:17 AM »

Quote from: cherry on August 01, 2020, 01:48:49 AM

Cxx use only k-line for read/write.

Is this the reason why mini dsg reader won’t work - or does it default to read by CAN, so if I connect to the box and force read by k-line it may work?


	Logged

jochen_145

Full Member

Karma: +9/-4
Offline

Offline

Posts: 177

	Re: DQ250 CXX Read/Write « Reply #6 on: August 02, 2020, 09:29:52 AM »

Quote from: cherry on August 01, 2020, 01:48:49 AM

Cxx use only k-line for read/write.

C11 uses CCP, so you are able to flash via CAN, if you tool supports.


	Logged

Dave9n3

Sr. Member

Karma: +27/-0
Offline

Offline

Posts: 289

	Re: DQ250 CXX Read/Write « Reply #7 on: August 03, 2020, 01:29:52 AM »

This is a C30 Part number: 02E300043Q Soft: 1305

I tried again direct from mechatronic unit and no luck. Not sure if the mini DSG reader I have is crap or they're all crap. Looks like I'm going to purchase PCM flash when i can find some tactrix openport in stock somewhere!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 03:53:03 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search