Pages: [1]
Author Topic: Single turbo quickest spool advice ? 2.7t  (Read 7209 times)
Stoti
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 79


« on: September 01, 2020, 02:10:14 PM »

Hello . Can somebody point me (if somebody did it before )
how quick maybe will be .63 turbine housing on 3071 3076 t04e ? Im planning to get for starting maxspeedingrod  (i knkw its not good to use chinese parts ) but will be better than driving N/A engine designed for turbo . Target is 350~450 hp i dont even care about this the idea is to be on top of engine easy to maintence .
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #1 on: September 03, 2020, 08:49:48 AM »

The problem is runner length.
It's why the Audi V6 TDI is laggy as fuck compared to BMW R6.
I wouldn't do it. The response is just shit. Even if you do a proper twinscroll manifold, it will still be shit.

If you had an inverted setup (like the new V8TT and V6T/V6TT) then it's a different story.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
IamwhoIam
Hero Member
*****

Karma: +43/-99
Offline Offline

Posts: 1030


« Reply #2 on: September 03, 2020, 10:06:47 AM »


If you had an inverted setup (like the new V8TT and V6T/V6TT) then it's a different story.

*JUST* flip the heads over!
Logged

I have no logs because I have a boost gauge (makes things easier)
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)