Pages: [1]
Author Topic: VW Polo 9N3 GTI Track Car  (Read 5066 times)
12Samsung79
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 12



« on: September 06, 2020, 10:43:14 AM »

Hello everyone,

I've recently joined nefmoto so I thought I'd show you all what I'm currently building. All custom work and work in general is done by myself. Smiley

It is a 1.8T 20V Polo 9N3 and the spec list is as follows:
 
PRE GEN2 rifle drilled 900hp rods
Supertech triple groove exhaust valves
550cc bosch injectors
AEM V2 50/50 watermeth injection
ARP bolts all over the place
Custom intercooler pipes
600x300x76 toyosports intercooler
Porsche cayman brakes with Ferodo DS1.11 pads and braided HEL lines
3" fully custom stainless exhaust
Littco 280 hybrid turbo
Ported exhaust manifold
80mm S3 MAF
APS265 intank fuel pump
Cobra buckets with TRS harnesses


The setup is yet to be mapped, but it will be mapped by a fellow nefmoto member @adam-
It should make around 300+hp / 300ftlbs+ for now but in the future will be over 400hp with a bigger turbo & injector setup.

Excited to race against other things on track.

Car needs corned weighted but I estimate 1050kg.   
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #1 on: September 07, 2020, 11:26:00 AM »

I wish the @s worked Sad
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)