Pages: [1]
Author Topic: Please-idle speed 1,8T ME7.5  (Read 5036 times)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« on: April 20, 2012, 10:38:31 AM »

I have problem, I can adjust higher idle speed.. In the original bin Skoda Octavia VRS 06A906032HN it is okey, without problem, but in the original bin from CupraR BAM 1ML906032A is it problem.. Please see pictures from winols with idle values

Please help me, I can adjust idle speed at 860 in the CupraR soft


this is 06A906032HN




this is 1ML906032A

Logged
masterj
Hero Member
*****

Karma: +61/-5
Offline Offline

Posts: 1049



WWW
« Reply #1 on: April 20, 2012, 10:56:37 AM »

I have problem, I can adjust higher idle speed.. In the original bin Skoda Octavia VRS 06A906032HN it is okey, without problem, but in the original bin from CupraR BAM 1ML906032A is it problem.. Please see pictures from winols with idle values

Please help me, I can adjust idle speed at 860 in the CupraR soft


this is 06A906032HN




this is 1ML906032A



Could you export both files as ols in 1.2 version?
Logged

eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #2 on: April 20, 2012, 11:00:20 AM »

I can, why?
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #3 on: April 20, 2012, 11:03:53 AM »

I can,but in 1.3 version OLS
Logged
masterj
Hero Member
*****

Karma: +61/-5
Offline Offline

Posts: 1049



WWW
« Reply #4 on: April 20, 2012, 11:28:39 AM »

I can,but in 1.3 version OLS

that is the lowest version that winols let you? My winols is 1.2 so I can't open any files higher than that... I could look into those ols and report if idle speed map is at correct address or not
Logged

eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #5 on: April 20, 2012, 11:56:51 AM »

yes, 1.3 is my lowest version what my winols do  Sad

original files
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)