1.8t BAM maf VS RS4 maf

Pages: 1 [2]

« previous next »

Author

Topic: 1.8t BAM maf VS RS4 maf (Read 9783 times)

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: 1.8t BAM maf VS RS4 maf « Reply #15 on: October 10, 2020, 09:53:49 AM »

Quote from: prj on October 10, 2020, 09:43:47 AM

Incorrect. RS4 uses a different, wider band sensor element! It's not only a housing size change.
BAM also uses this wider band sensor element IIRC.

do you know the pn? I have 078 906 461B for bosch s4


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: 1.8t BAM maf VS RS4 maf « Reply #16 on: October 10, 2020, 10:08:01 AM »

Quote from: nyet on October 10, 2020, 09:53:49 AM

do you know the pn? I have 078 906 461B for bosch s4

unfortunately the unit p/n wont tell the sensor p/n (f00xxx..) , and since vag p/n change with even the slightest iteration it could be different. But this time its whole different group of p/n.

rs4 bosch - 077133471K(X)

AFAIK, all the maf related maps in a system with mlofs active mafs take the offset in account in the values


« Last Edit: October 10, 2020, 10:16:34 AM by Blazius »	Logged

tao13

Sr. Member

Karma: +17/-47
Offline

Offline

Posts: 471

	Re: 1.8t BAM maf VS RS4 maf « Reply #17 on: October 10, 2020, 10:11:15 AM »

guys , please the conclusion for me , can i use MLHFM from rs4 file with my bam sensor and rs4 case
("RS4 stock MLHFM ends at 1996.1 kg/hr. With MLOFS, that is 1796.1, or 498.9 g/sec") or it is ok how i proceed to adjust my mlhfm with mafadjuster tool witch result a different mlhfm like rs

and again please rewrite my issues from today log:
1. i have 850-870 highest maf value kg/h in the log but in my file the mlmax is set to 680. the error not appear because mkmax+mlofs = 880 > my highest maf value?
2. MassAirFlowAtThrottlePlate( msdk_w ) is lower than MassAirFlow( mshfm_w ) , when rpm increased the difference increased too (higher). This means i have a boost leak or the turbo restrict the debit of air?
Thanks in advance.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: 1.8t BAM maf VS RS4 maf « Reply #18 on: October 10, 2020, 10:26:31 AM »

Quote from: Blazius on October 10, 2020, 10:08:01 AM

AFAIK, all the maf related maps in a system with mlofs active mafs take the offset in account in the values

Not sure what you mean by this.

MLHFM output is not the same as the input to any MAF related table that has MAF as an input. MLOFS is added first.


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: 1.8t BAM maf VS RS4 maf « Reply #19 on: October 10, 2020, 10:29:12 AM »

Quote from: nyet on October 10, 2020, 10:26:31 AM

Not sure what you mean by this.

MLHFM output is not the same as the input to any MAF related table that has MAF as an input. MLOFS is added first.

thats exactly what I meant


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: 1.8t BAM maf VS RS4 maf « Reply #20 on: October 10, 2020, 10:30:54 AM »

Quote from: tao13 on October 10, 2020, 10:11:15 AM

1. i have 850-870 highest maf value kg/h in the log but in my file the mlmax is set to 680. the error not appear because mkmax+mlofs = 880 > my highest maf value?

No, in this context blazius is correct. MLMAX is vs the real value which is MLHFM + MLOFS.

Please, in the future, just look at the FR, it is much easier. No clue why you aren't getting a DTC

Quote

2. MassAirFlowAtThrottlePlate( msdk_w ) is lower than MassAirFlow( mshfm_w ) , when rpm increased the difference increased too (higher). This means i have a boost leak or the turbo restrict the debit of air?

boost leaks are much more apparent by looking at fuel trims, since msdk_w is modeled.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: 1.8t BAM maf VS RS4 maf « Reply #21 on: October 10, 2020, 10:39:44 AM »

That said, if fuel trims are ok but you suspect a DV leak, it may show up in ps_w vs pvdks and msdk vs mshfm


	Logged

tao13

Sr. Member

Karma: +17/-47
Offline

Offline

Posts: 471

	Re: 1.8t BAM maf VS RS4 maf « Reply #22 on: October 10, 2020, 10:42:57 AM »

i don't logged ps_w, will make.
from 1 week i checked and rechecked and rechecked all possible leak in the system
i don't find any problem.
so from where is the difference betwen air flow at throtle and maf? can be a bad maf sensor?
my fuel trims are instable but i have a topic on this problem, i think my injectors or fpr are bad. in 2 days will change the fpr with new 4bar fpr (now it has 3bar) and will see
i tried different TVUB but with little modification in tvub the checkengine is light.
i tried with little more fkkvs on low rpm but the same problem checkengine is light.


	Logged

prj

Hero Member

Karma: +1072/-481
Offline

Offline

Posts: 6038

	Re: 1.8t BAM maf VS RS4 maf « Reply #23 on: October 11, 2020, 12:26:27 AM »

There is nothing to check or re-check.
You make a pressure tester and do a pressure test from turbo inlet (or on the 1.8T transverse platform from the charge pipe).
If it holds pressure -> no leak.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 09:46:16 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search