Pages: 1 [2]
Author Topic: Galletto - boot mode only?  (Read 20128 times)
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #15 on: July 13, 2012, 02:39:42 PM »

OK! Good News! IT WORKS!

The cable was ok. The problem was the voltage. I wanted to work with 13V and more.

Obvisiously, the cheap Galletto doesnt work with that voltage, although a voltage like that is demanded .!!!

So 12.X Volts are better for working than 13+!

So all in all, i can say Galletto 1260 works on an S4 ME7.1 (29f800bb) via OBD onboard flash without boot mode!

The flash needed about 22 minutes.

Have fun!

Why?

Why not use NefMoto?

Logged
AndiS4
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 117



« Reply #16 on: July 13, 2012, 03:02:13 PM »

I think its just a thing good to know...

Because most think galletto is only Working in boot mode on s4's me7.1...


I just wanted to find out. Now i can confirm it runs.Smiley
« Last Edit: July 13, 2012, 03:08:22 PM by AndiS4 » Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #17 on: July 13, 2012, 03:11:26 PM »

I think its just a thing good to know...

Because most think galletto is only Working in boot mode on s4's me7.1...


I just wanted to find out. Now i can confirm it runs.Smiley


Galletto is only useful in boot mode for recovery.

1 min to flash with Nef > 22 mins to flash with Galletto.
Logged
AndiS4
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 117



« Reply #18 on: July 13, 2012, 03:14:52 PM »

Ill try it the next flash. Smiley

Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)