Pages: [1]
Author Topic: Hello !!  (Read 1846 times)
Flynn
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: October 11, 2020, 01:40:06 AM »

Hello everyone,

I'm here to learn stuff about ECU FRM dumping and editing, I try to understand how to RE stuff.
Logged
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #1 on: October 11, 2020, 09:56:57 AM »

Welcome! Before all I would suggest reading through the noob section and well as the documents and how to section. That should get some of the basics out and get you a starting point.

There is a lot on here and most of what you will be looking for on a basics standpoint is most likely going to be findable and searchable to expedite.


The time you put into it is directly linked to the success that you are going to have.

Best journeys and reading
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)