Pages: 1 [2]
Author Topic: K-TAG clone V2.23 can work with 2.33?  (Read 8277 times)
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #15 on: October 29, 2020, 01:27:54 PM »



It would be a good thing if I had seen it before cutting my ECU to open!
Sad
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #16 on: October 29, 2020, 01:37:35 PM »


It would be a good thing if I had seen it before cutting my ECU to open!
Sad
Look at all files, looks like there is a program to flash
ST10F269

Code:
    This program is made for laboratory environments and usage by engineers knowing the device they are working with. This is a free tool which must be taken as it is, no support being ensured.

The target of this flasher is simple: A engineer develops code for one of STMicroelectronics nice embedded flash microcontrollers (like the ST10F168 and others) and wants to program it (fast and easy) from his desktop PC into the chip. If that is what you are looking for, then this program is for you.
   

Code:
     ---------
ST10Flasher supports following ST10 derivatives:
ST10F168, ST10F169, ST10F269
 

Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #17 on: October 29, 2020, 01:52:50 PM »

Look at all files, looks like there is a program to flash
ST10F269

Code:
    This program is made for laboratory environments and usage by engineers knowing the device they are working with. This is a free tool which must be taken as it is, no support being ensured.

The target of this flasher is simple: A engineer develops code for one of STMicroelectronics nice embedded flash microcontrollers (like the ST10F168 and others) and wants to program it (fast and easy) from his desktop PC into the chip. If that is what you are looking for, then this program is for you.
   

Code:
     ---------
ST10Flasher supports following ST10 derivatives:
ST10F168, ST10F169, ST10F269
 



Iwill buy this programmer to make a test!!!

Thanks for information
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #18 on: October 29, 2020, 01:53:55 PM »


all these pisctures are to use in ktag? or will fit to all programmers?

thanks for pictures and video!
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #19 on: January 12, 2021, 04:38:54 PM »

Buy Ori Tool, if you brick your ecu while writing that work costs a lot of Money

X-Boost Performance



I tried with original ktag and dont works.

Its a so different ECU, have few information.


so far i don't know which programmer can read this ecu. So there's no way to buy original or fake programmer
Sad
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.11 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)