Pages: [1]
Author Topic: STFT temperature treshold  (Read 2395 times)
curamrdan
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 128


« on: October 23, 2020, 04:18:56 PM »

Which map in MED9/17 (or atleast ME7) can i edit to change teperature treshold for closedloop lambda control - STFT?

And also i did not find any maximum/minimum of STFT allowed correction, tried change all FRAxx  MN+MX  values , still getting up to +-25%

Im playing with dual bank engine, with lambda sensors in one pipe due turbo, so want to try little nubm negative correction in warm up phase as bandaid.
Logged
noice
Newbie
*

Karma: +16/-3
Offline Offline

Posts: 23


« Reply #1 on: October 24, 2020, 04:42:30 AM »

Which map in MED9/17 (or atleast ME7) can i edit to change teperature treshold for closedloop lambda control - STFT?

And also i did not find any maximum/minimum of STFT allowed correction, tried change all FRAxx  MN+MX  values , still getting up to +-25%

Im playing with dual bank engine, with lambda sensors in one pipe due turbo, so want to try little nubm negative correction in warm up phase as bandaid.
Two independent control systems trying to control a single plant. Nothing good will come from this...
Logged
curamrdan
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 128


« Reply #2 on: October 24, 2020, 02:30:56 PM »

If you have any solution for me, let me know. I still with search for a protuner who are willing to bother as job, with my custom project, so till now its all on me.

Im still after answers.

Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #3 on: October 24, 2020, 02:45:52 PM »

KFFRMIN
Logged
curamrdan
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 128


« Reply #4 on: October 26, 2020, 09:14:42 AM »

Thank you, works for what i need Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)