Having read about this, I have looked at the AUM with the HJ Map and updated it with some information from a HN map from a AUQ,

Whilst I noticed some of the maps were the same, some had different elements and were copied across using Tunerpro, by far the hardest issue was finding the correct XDF for both ecu's and then running two tunerpro windows, to see the differences.

Once I had changed the files, it require a checksum fix, but once that was done it worked on the car and has increased the power, and currently has not had any issues with fueling.

The files I changed as per a previous post on this site were:-
KFPED,
KFMIRL,
KFMIOP,
KFZW,
KFZW2,
KFZWOP,
KFZWOP2,
LDRXN,
LDRXNZK,
KFMLDMX

Please see the two files below for a before and after.
Any feedback is greatfully recieved.