Pages: [1]
Author Topic: Raise idle speed  (Read 3466 times)
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« on: April 28, 2012, 03:11:46 PM »

Although maps are upscaled, idle speed is still on 760rpm (mafless).

Via lemmiwinks i can udjust higher idle speed but i wanna make it via programming.

Idle speed while heating catalyst is default but catalyst heating is disabled by zeroing two FKHABMN maps.

What i am doing wrong?

Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #1 on: April 29, 2012, 01:05:39 AM »

I figure it out.
10 maps overall are used for idle speed + 6 for special conditions (climatronic, high engine temps etc).
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)