Pages: [1]
Author Topic: Pops & Bangs when stepping on the clutch in MED 9.1  (Read 3277 times)
Albertoak
Full Member
***

Karma: +6/-16
Offline Offline

Posts: 76


Well done is better than well said....


« on: December 04, 2020, 07:59:20 AM »

Hi.
After reviewing the FR of med 9.1 many times and doing different tests ...

I am not able to get it to inject petrol X seconds of FTVSA when the clutch is depressed (gear change).

If I use: KFNWEGM injects yes or yes below the RPM that I put in the table. Whether the clutch is depressed or not. But the idea is to be able to inject X time when stepping on the clutch between gear changes.

I think there must be some byte that disables this injection for seconds in the clutch pedal management module in the flash. but I can't find him ...

Any ideas??

Ecu med 9.1 5K0907115K

thanks!!!
Logged
d1scussi0n
Jr. Member
**

Karma: +5/-6
Offline Offline

Posts: 34


« Reply #1 on: December 04, 2020, 08:52:25 AM »

Search for CWSAWE.
Logged
xXxCryxXx
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 157


« Reply #2 on: December 04, 2020, 08:53:31 AM »

Search for CWSAWE.
thats only for permanent solution CWSAWE

X-Boost Performance

Logged
Albertoak
Full Member
***

Karma: +6/-16
Offline Offline

Posts: 76


Well done is better than well said....


« Reply #3 on: December 04, 2020, 01:17:26 PM »

Yes, of course. CWSAWE always at 01. But not even with those ...
Logged
Albertoak
Full Member
***

Karma: +6/-16
Offline Offline

Posts: 76


Well done is better than well said....


« Reply #4 on: December 07, 2020, 11:52:12 PM »

solved. it was a filter byte from b_kuppl. I already have pops when changing gear following kftvsa Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0s, 0q)