NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Vagtacho for MK5 to make new key
Pages: [1]
« previous next »
Author Topic: Vagtacho for MK5 to make new key  (Read 4078 times)
ironhk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« on: December 11, 2020, 07:23:22 AM »
Hello All,

my 2005 MK5 GTI has only one key and would like to make one by Vagtacho,

Part: 1K6920860E
Component: KOMBIINSTUMENT VDD

I select ECU " VDO New - CAN bus TP2"
connected successfully, however it showed Wrong Seed-Key, Try Manual mode for FDO! See Options in Menu.

Can anyone help?

Thanks
Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204
« Reply #1 on: December 12, 2020, 06:35:38 PM »
Quote from: ironhk on December 11, 2020, 07:23:22 AM
Hello All,

my 2005 MK5 GTI has only one key and would like to make one by Vagtacho,

Part: 1K6920860E
Component: KOMBIINSTUMENT VDD

I select ECU " VDO New - CAN bus TP2"
connected successfully, however it showed Wrong Seed-Key, Try Manual mode for FDO! See Options in Menu.

Can anyone help?

Thanks
VDO old dash model
VDD new dash model
Logged
ironhk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #2 on: December 13, 2020, 05:51:41 AM »
Quote from: elektronik13 on December 12, 2020, 06:35:38 PM
VDO old dash model
VDD new dash model
So, i have to choose another ECU type?
Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204
« Reply #3 on: December 13, 2020, 03:43:20 PM »
Quote from: ironhk on December 13, 2020, 05:51:41 AM
So, i have to choose another ECU type?

Yes
because VDD is crypto
Logged
ironhk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #4 on: December 14, 2020, 05:06:46 AM »
Quote from: elektronik13 on December 13, 2020, 03:43:20 PM
Yes
because VDD is crypto
i have tried the newer one but not work,
cannot connect
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260
« Reply #5 on: December 14, 2020, 06:04:44 AM »
Maybe not supported version. Ask support or use other tool or read pin from med9.1 ecu.
Logged
ironhk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #6 on: December 14, 2020, 06:43:17 AM »
Quote from: cherry on December 14, 2020, 06:04:44 AM
Maybe not supported version. Ask support or use other tool or read pin from med9.1 ecu.
any advise for other tool that can read?
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260
« Reply #7 on: December 14, 2020, 01:00:45 PM »
You can also upload flash / eeprom from ecu, it´s possible to get pin then too. For cluster carprog should work too, i assume you are looking for some cheap clone tool?
Logged
ironhk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #8 on: December 15, 2020, 07:56:39 AM »
Quote from: cherry on December 14, 2020, 01:00:45 PM
You can also upload flash / eeprom from ecu, it´s possible to get pin then too. For cluster carprog should work too, i assume you are looking for some cheap clone tool?
Sir, upload flash to get pin?
If cheap clone tool is work, it will be great to do that
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 01:34:57 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)