Pages: [1]
Author Topic: XDF or mappack for 4B0907551D A6 C5 2.7 BiTurbo 6MT or flash an other.  (Read 3345 times)
radzio3747
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6



Hello to all forum members, i need to help with ECU 4B0907551G 0261206106 1037350070 in my A6 C5 2.7 BiTurbo AJK 6mt. I can't find XDF or Mappack for winols. I searched the forum and found nothing interesting, just a flash to 8D0, but is it possible? If anyone has a mappack I can pay. I am uploading the file ECU from flash dumped from KTAG. Thank you very much, any information is important to me.

Regards, radzio3747
Logged
tjwasiak
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 420


« Reply #1 on: December 28, 2020, 12:33:07 PM »

Is it really that hard to use already defined software to find all relevant maps in your dump? ME7 is really not that complicated and there are huge similarities between different files meant to run similar hardware.
Logged
radzio3747
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #2 on: December 28, 2020, 03:04:56 PM »

It is based on other ME7.5 maps, I found they are the same, but I have a problem to add them and set them appropriately. The first map is LDRXN, found it but not sure if it's okay. I have a big problem with setting main map "Start Address", "Columns" and added map "Factor, Offset> Value"  Huh, I marked it with a red pen on the screenshot.  Roll Eyes

Regards, radzio3747
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: December 28, 2020, 03:59:17 PM »

Yes, you can cross flash to any ME7.1 file
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
radzio3747
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #4 on: January 02, 2021, 05:10:23 AM »

I found mappack for this ECU 4B0907551D 512KB from 8D0907551C 512KB. Mappack is not big but maps like LDRXN, LAMFA, TVUB, KRKTE, KVB, KFMIRL, KFMIOP, KFZW, KFZW2 are included and others, also upload file.  Wink

Is it worth changing ECU to 8D0907551M?


Regards
radzio3747
Logged
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« Reply #5 on: October 24, 2021, 11:17:03 AM »

I found mappack for this ECU 4B0907551D 512KB from 8D0907551C 512KB. Mappack is not big but maps like LDRXN, LAMFA, TVUB, KRKTE, KVB, KFMIRL, KFMIOP, KFZW, KFZW2 are included and others, also upload file.  Wink

Is it worth changing ECU to 8D0907551M?


Regards
radzio3747

I dont know if im to late. But for all People who have a Car with a 4B0907551D (512KB) Ecu. Just take a 8D0907551C (512KB) . You can Crossflash them and there is a XDF on this Topic which will work for a normal Stage 1 (K03 Turbos on Limit). The best thing to do is to switch on a second ECU like 8D0907551M (1024KB). Just Change from HITACHI MAF to Bosch and you have the best ECU to get startet at Tuning. Maybe someone can help this Info. Greetings from Germany.
Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)