Pages: [1]
Author Topic: ME7.5 After IMMO OFF no response  (Read 6353 times)
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« on: January 23, 2021, 09:30:58 AM »

Hello, i have an Me7.5 1.8T ECU and i changed the IMMO via "ME7EEPROM Tool & EEPROMTOOL04"
The ECU Starts in Bootmode and i can read the Flash.
I can also write the ECU but MPPS gets no connection without Bootmode.
I also changed the IMMO back to Original and the Flash.

Bootmode works fine, just get no answer after all of this.
maybe someone has a Idea.
Thanks.
Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #1 on: January 23, 2021, 09:26:06 PM »

ether the files you have are someone else's and they have some kind of custom code for security, you used the wrong protocol to read and or write and the eeprom is corrupt as the end result, you didn't correct checksums, or you shorted out the ecu. considering you said it still goes into bootmode i doubt its fried fwiw.   
Logged

Giving your mom a tuneup
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« Reply #2 on: January 24, 2021, 12:53:12 AM »

Mhm, the EEPROM is still Write and Readable. Also the Flash. Checksums checked. Also the Stock File from the ECU does nothing.

How coud i kill the ecu?
Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #3 on: January 24, 2021, 01:53:52 AM »

Why don't you post your files?
Logged
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« Reply #4 on: January 24, 2021, 10:18:05 AM »

Here are the Files.
Thats the Stock ones i got from the ECU
Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #5 on: January 24, 2021, 11:27:38 AM »

Try to write this eeprom
Logged
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« Reply #6 on: January 24, 2021, 12:16:00 PM »

I will do tomorrow.
Thanks!
Did you find anything "special" in my EEPROM?
Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #7 on: January 24, 2021, 12:18:08 PM »

Bad checksum, I didn't search any further
Logged
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« Reply #8 on: January 25, 2021, 03:00:04 PM »

It also dont worked with your File.
Still cant get connection to the ecu.
Maybe i killed the EEPROM with the wrong Checksum? But i cant believe that.
I Mmade another file with the original EEPROM File, that shoud work.
Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« Reply #9 on: January 25, 2021, 03:25:56 PM »

I also tryed Immo On/Off.
With other Flashes i have the Problem that they Fail. Just the Stock one works..
« Last Edit: January 25, 2021, 03:39:55 PM by HR-Performance » Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #10 on: January 25, 2021, 05:00:00 PM »

Galeto1260 is better for recover ECU.
I never have any similar issuse with amy ME7. What is part number of ECU?
Logged
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« Reply #11 on: January 25, 2021, 05:19:57 PM »

Part number is 4B0 906 018AL
Never had any isses with MPPS
Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #12 on: January 26, 2021, 06:21:24 PM »

so just so i understand. which EEPROM file do you "have" that does start with the car? please share as this one has all the information XXX out.
Logged
OberlandRacing
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 45



« Reply #13 on: January 26, 2021, 11:42:11 PM »

I`ve tested many EEPROM Files.
With the EEPROM Tool i checked every File for Checksum.
Also i checked the Flash.bin for checksum.
ECU gets wthout any Problems in Bootmode.
But MPPS cant get a connection. But before i played with IMMO it worked. It was the first ECU that i played with Immo.
Just the first File had bad checksum because i forget to fix it. (--fixcs)

So i will throw it in the car and test it.

Logged

Audi S4 B5 2.7 AGB FL
Audi A4 B5 1.8T ANB FL
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)