NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > ME 7.5 S3 8L POPS AND BANG & SOFT LIMITER LC
Pages: [1]
« previous next »
Author Topic: ME 7.5 S3 8L POPS AND BANG & SOFT LIMITER LC  (Read 4499 times)
VagHead
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 19
« on: January 24, 2021, 06:05:21 AM »
Hi! I have 2000 Audi S3 8L . I tried to add pops and bangs but i couldn't take any pops on my exhaust. I have 3" dp and stock mufflers after that. My file is 512kb and i don't have cwsawe value in my file.
How can i add pop and bang this file?
I tried to do:
KFTVSA: 2.55 sec
KFZWOP: Org. Value - 25
KFZWMN: -29.250 for lowest 2 load area
DNWEK: 6000 rpm for A/C button

And here is the another question ! I want to add Soft Limiter LC on my file but 512 kb me 7.5 file has not VNMX and NMAXOG. How can i add soft limiter lc on my file? I need reverse engineering for that ?
Logged
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109
« Reply #1 on: February 04, 2021, 12:39:39 PM »
You are lazy. All should be in Your file... for example... NMAXOG 13504 i see 6600  Roll Eyes

P.S. 157C1 look like VNMX, but for soft limiter should be changed more... all on s4wiki.
Logged
VagHead
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 19
« Reply #2 on: February 05, 2021, 03:19:07 AM »
Ahahaha no i'am not lazy . My file is 512 kb and my file doesn't have nmaxog and vnmx Smiley I have damos for my sw.
Logged
VagHead
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 19
« Reply #3 on: February 05, 2021, 10:41:29 AM »
Quote from: Kompiesto on February 04, 2021, 12:39:39 PM
You are lazy. All should be in Your file... for example... NMAXOG 13504 i see 6600  Roll Eyes

P.S. 157C1 look like VNMX, but for soft limiter should be changed more... all on s4wiki.

13504 is NMAXDV , 157c1 is TNMXPR Smiley
Logged
marcello
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 2
« Reply #4 on: February 06, 2021, 10:05:31 AM »
Hi, I Have an Audi A3 8L quattro 150hp, engine code ARX with ME 7.5.5 ecu and i'm trying to make the same thing, i have 1024kb original ecu file, but I don't find KFTVSA, KFZWMN and DNWEK, i have only KFZWOP and KFZWOP2 in tables.

Someone can Help me? Thanks

I upload my original file.
Logged
VagHead
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 19
« Reply #5 on: February 08, 2021, 05:42:02 AM »
Quote from: marcello on February 06, 2021, 10:05:31 AM
Hi, I Have an Audi A3 8L quattro 150hp, engine code ARX with ME 7.5.5 ecu and i'm trying to make the same thing, i have 1024kb original ecu file, but I don't find KFTVSA, KFZWMN and DNWEK, i have only KFZWOP and KFZWOP2 in tables.

Someone can Help me? Thanks

I upload my original file.



Hi!

Here is your values .

199E9 - KFTVSA 8x5 8bit
19A11 - KFTVSAKAT 8x4 8bit
11557 - 11607 - KFZWOP1 and KFZWOP2 11x16 8bit
1756C - 17640 - 176A6 - KFZWMN MAPS two of them is 12x16 and one of them is 12x6
11217 - DNWEK 8bit

Here is your Damos file Smiley I will be glad if you can give thanks for it !





Logged
marcello
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 2
« Reply #6 on: February 08, 2021, 09:01:06 AM »
Thank you so much  Wink, but I have another question, is possible to use the AC button to “activate” pops and bangs? I’ve do it this thing in a BMW E46 with a Siemens ECU, using RomRaider.
Thanks  Grin

(I’m new to this forum)
Logged
VagHead
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 19
« Reply #7 on: February 08, 2021, 11:13:45 AM »
Quote from: marcello on February 08, 2021, 09:01:06 AM
Thank you so much  Wink, but I have another question, is possible to use the AC button to “activate” pops and bangs? I’ve do it this thing in a BMW E46 with a Siemens ECU, using RomRaider.
Thanks  Grin

(I’m new to this forum)

Yes it is possible with increasing DNWEK. You can read FR to see what is DNWEK is doing.
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230
« Reply #8 on: February 08, 2021, 12:09:16 PM »
Quote from: VagHead on February 08, 2021, 05:42:02 AM
Hi!

Here is your values .

199E9 - KFTVSA 8x5 8bit
19A11 - KFTVSAKAT 8x4 8bit
11557 - 11607 - KFZWOP1 and KFZWOP2 11x16 8bit
1756C - 17640 - 176A6 - KFZWMN MAPS two of them is 12x16 and one of them is 12x6
11217 - DNWEK 8bit

Here is your Damos file Smiley I will be glad if you can give thanks for it !








The DAMOS is wrong
Logged
VagHead
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 19
« Reply #9 on: February 09, 2021, 12:05:40 PM »
Quote from: stuydub on February 08, 2021, 12:09:16 PM

The DAMOS is wrong

Okay Smiley You can attach the true damos for him
Logged
VagHead
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 19
« Reply #10 on: February 10, 2021, 12:40:07 AM »
Quote from: stuydub on February 08, 2021, 12:09:16 PM

The DAMOS is wrong


Damos seems correct according to my controls. I repeat, if you have such a claim, you should send the correct damos
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230
« Reply #11 on: February 11, 2021, 12:21:52 PM »
I see u was replying to a different comment not to OP
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 10:31:21 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)