Pages: [1]
Author Topic: Audi A3 Comfort Module Pinout  (Read 2510 times)
JakeGT
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 21


« on: February 25, 2021, 12:32:03 AM »

Hi,

I've been getting parts together to allow bench testing on Audi A3 8P cluster. I've got a CAN gateway module & comfort module but can't find a pinout for it. This is the pinout I have found online for wiring the whole system but it doesn't match my module? Have I got the wrong module or does anyone have a pinout for this one? Thanks

https://i.ebayimg.com/images/g/b~wAAOSwdRJgKXnK/s-l1600.jpg

CAN Gateway:
12v: 1,2
12v IGN: 14
GND: 11,12
CAN Dash: 8 (CanH) 18 (CanL)
WakeupDash: 13
CAN Diag: 9 (CanH) 19(CanL)
CAN Bordnetz: 5(CanH) 15(CanL)

Dash:
12v: 1,2,18
GND: 3,4,19
CAN Wakeup: 5
CAN: 29(CanH),30 (CanL)

Bornetz:
Plug A:
12v+: 1
GND: 9

Plug F:
12v+ IGN:2

Plug G:
CAN H: 8
CAN L: 7
12v+ IGN: 11

Plug K:
12v+: 5
Logged
JakeGT
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 21


« Reply #1 on: February 25, 2021, 12:40:31 AM »

I realise now I've not got the correct unit  Roll Eyes
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 16 queries. (Pretty URLs adds 0.01s, 0q)