Hello everyone, I seem to have really screwed something up along the way of attempting to convert a 2005 allroad 4.2 ecu to manual. I was trying to change the softcode in the eeprom as you cant do this with vcds on this ecu. So I read the eeprom as 95080 using me7eeprom tool, and rewrote with changes. It did not work(softcode rewrote itself after plugging into ecu) and now I can no longer write a new ecu bin file(not eeprom) vehicle starts fine no noticeable issues just I cant rewrite a new file(bootmode works). I now know that the eeprom chip is a 95P08 and not a 95080. I read they are the same but I have learnt that was incorrect. So in short if someone please PLEASE please has an original eeprom out of a 2005 allroad 4.2 me7.1.1 4d0907560dc ecu with a 95P08 eeprom(or something as similar as possible) you would be a life saver. Alternatively if someone feels they can fix the file I will attach.  THX