Pages: [1]
Author Topic: 0x22 Read Data By Local ID  (Read 5888 times)
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« on: March 09, 2021, 04:09:56 AM »

Am I correct that all Data IDs (DIDs) are not the same for any VAG MED17 UDS ECU?
Logged
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449


« Reply #1 on: March 09, 2021, 04:34:52 AM »

Am I correct that all Data IDs (DIDs) are not the same for any VAG MED17 UDS ECU?


1.The DIDs are not the same but there are common ones among them.
2.The values that come from sensors are usually different from generation to generation
3.Basic Functions like Vin identification are usually the same on all UDS ecus
4.DIDs from Sensor values, bit-masked variables etc are hashed into a table in ram.

You can find a reference in rom from those variables but you will not be able to match them with the did.They are located under rdbi config area.
Easier way to identify them if you have no disassembly skills, is to use a can sniffer and a diagnostic device that has the ability to do 0x22(rdbi) requests over uds.
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #2 on: March 09, 2021, 05:36:41 AM »

Thanks. I found these RAM offsets and the corresponding DIDs, but if so called Signalnames are different for each ECU it doesn't make sense.
Logged
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449


« Reply #3 on: March 09, 2021, 09:40:43 AM »

Thanks. I found these RAM offsets and the corresponding DIDs, but if so called Signalnames are different for each ECU it doesn't make sense.


As i stated above. Not all of them are different.This is the reason VCDS has so many rod files Smiley Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 18 queries. (Pretty URLs adds 0s, 0q)