shaker87
Newbie
Karma: +0/-5
 Offline
Posts: 7
|
 |
« on: March 12, 2021, 01:35:03 PM »
|
|
|
I have a Problem with pop & bang via A/C Button I have changed the following areas CWSAWE 1 DNWEK 7000 KFZWMN first two to -18 KFZW2 first two to -18 This isn't working.. no Pops  Have i to change any value in KFTVSA and KFNWEGM? Btw the A/C won't work. The System has no gas inside. |
|
|
|
|
Logged
|
|
|
|
Tomas
Jr. Member
Karma: +2/-0
Offline
Posts: 27
|
|
« Reply #1 on: March 12, 2021, 03:03:11 PM »
|
|
|
Look around... I just recently wrote about this. If you want pops and bangs on overrun, this is what I do:
KFTVSA --> where you want it to happen 2.5s , and then modify the lowest load line of KFZWOP1&2 -22degrees, KFZWMN -31, KFZWMS -96, from 4000rpm to 6000.
No need to modify KFZW or KFZW2 for pops.
That will give you nice pops on overrrun down to 4000rpm
|
|
|
|
|
Logged
|
|
|
|
shaker87
Newbie
Karma: +0/-5
Offline
Posts: 7
|
|
« Reply #2 on: March 13, 2021, 02:47:54 AM »
|
|
|
Look around... I just recently wrote about this. If you want pops and bangs on overrun, this is what I do:
KFTVSA --> where you want it to happen 2.5s , and then modify the lowest load line of KFZWOP1&2 -22degrees, KFZWMN -31, KFZWMS -96, from 4000rpm to 6000.
No need to modify KFZW or KFZW2 for pops.
That will give you nice pops on overrrun down to 4000rpm
so i got it . but it should pop via A/C Button. Here in Germany the cops are very terrible with something like that.. Have you any idea how to get this job done on A/C Button? |
|
|
|
|
Logged
|
|
|
|
|
Sandstorm3k
|
|
« Reply #3 on: March 13, 2021, 05:55:19 PM »
|
|
|
Use KFZWMN and KFZWOP. TVSAG0 for completion.
If you only want it to pop on AC set DNWEK to 6000 and leave KFTVSA stock or even set to 0. Then it won't pop ever with AC off.
.
|
|
|
|
|
Logged
|
|
|
|
Tomas
Jr. Member
Karma: +2/-0
Offline
Posts: 27
|
|
« Reply #4 on: March 13, 2021, 07:37:05 PM »
|
|
|
If you fear getting pulled over then you shouldn't do pops on overrun, which isn't illegal btw, but you should have a certified/homologated exhaust.
Sent from my Redmi Note 9S using Tapatalk
|
|
|
|
|
Logged
|
|
|
|
joncupra
Newbie
Karma: +0/-1
Offline
Posts: 8
|
|
« Reply #5 on: March 17, 2021, 04:57:38 AM »
|
|
|
Hi Guys, I have a 1m AUQ Stage 2 Leon and I want to add the pop and bang with A/C but keep getting checksum issues. ME7check v1.08 (c) mki, 06/2004-04/2011
Checking file Stage_2_AUQ_Pops.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 41/1/ME7.5/51/4518.06//24B/Dst01o/131102/
-> Contents of ECUID data table:
- '0261208221' (SSECUHN)
- '1037367220' (SSECUSN)
- '1ML906032A ' (VAG part number)
- '0001' (VAG sw number)
- '1.8l R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'
-> Found 6 errors!!! ******************************* I have no idea how to resolve this, as I am new to all this. Is it possible for someone to add loud pop and bang via A/C for me please? Thank you! |
|
|
|
|
Logged
|
|
|
|
V3t3r
Newbie
Karma: +0/-0
Offline
Posts: 1
|
|
« Reply #6 on: May 03, 2021, 04:33:28 AM »
|
|
|
I can help inbox me.
|
|
|
|
|
Logged
|
|
|
|
Dkaya
Newbie
Karma: +0/-0
Offline
Posts: 1
|
|
« Reply #7 on: August 18, 2021, 05:03:30 AM »
|
|
|
Use KFZWMN and KFZWOP. TVSAG0 for completion.
If you only want it to pop on AC set DNWEK to 6000 and leave KFTVSA stock or even set to 0. Then it won't pop ever with AC off.
.
This solution works like a charm for putting it under the AC function. Tested it just now  Thanks for the information much appreciated! Kind Regards. |
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #8 on: August 18, 2021, 07:18:43 AM »
|
|
|
If you fear getting pulled over then you shouldn't do pops on overrun, which isn't illegal btw, but you should have a certified/homologated exhaust.
Sent from my Redmi Note 9S using Tapatalk
ok dad lol |
|
|
|
|
Logged
|
Giving your mom a tuneup
|
|
|
ZpiXDK
Jr. Member
Karma: +5/-2
Offline
Posts: 45
|
|
« Reply #9 on: August 19, 2021, 07:34:06 AM »
|
|
|
If you fear getting pulled over then you shouldn't do pops on overrun, which isn't illegal btw, but you should have a certified/homologated exhaust.
Sent from my Redmi Note 9S using Tapatalk
Here in Denmark it’s illegal so would also guess it’s illegal in Germany too (: -Unnecessary noise (same as with wheelspin) and if you do real pops it’s also over the noise limit. -Removing the CAT will put you in risk of Emmision fraud (heavy fines, never seen any tho) Have seen people get fines for pops here in Denmark (: |
|
|
|
|
Logged
|
You want some tuning with that pop and bang?
-Nahh it’s not good for the engine
|
|
|
Geomeo
Full Member
Karma: +11/-6
Offline
Posts: 152
|
|
« Reply #10 on: August 19, 2021, 08:30:20 AM »
|
|
|
Here in Denmark it’s illegal so would also guess it’s illegal in Germany too (:
-Unnecessary noise (same as with wheelspin) and if you do real pops it’s also over the noise limit.
-Removing the CAT will put you in risk of Emmision fraud (heavy fines, never seen any tho)
Have seen people get fines for pops here in Denmark (:
Apparently Denmark is supposed to be the second happiest place in the world. I’m wondering why.  |
|
|
|
|
Logged
|
|
|
|
_Bubik
Jr. Member
Karma: +1/-4
Offline
Posts: 28
|
|
« Reply #11 on: July 12, 2022, 01:01:37 AM »
|
|
|
So...If I don't have gas inside A/C, will it work?
|
|
|
|
|
Logged
|
|
|
|
|
Sandstorm3k
|
|
« Reply #12 on: July 12, 2022, 05:51:37 AM »
|
|
|
So...If I don't have gas inside A/C, will it work?
Yes |
|
|
|
|
Logged
|
|
|
|
_Bubik
Jr. Member
Karma: +1/-4
Offline
Posts: 28
|
|
« Reply #13 on: July 12, 2022, 06:17:46 AM »
|
|
|
Yes
Okay, so I am wrong with something. I tried to set dnwek to 6000, kftvsa was stock (I also tried to zero for all columns - result was same), tvsag0 to 2.5 and it still pops for all the time. It didn't matter if I used A/C or not. (I have 1.8t AUM 06A906032HJ) |
|
|
|
|
Logged
|
|
|
|
|
Sandstorm3k
|
|
« Reply #14 on: July 12, 2022, 07:12:03 AM »
|
|
|
Okay, so I am wrong with something.
I tried to set dnwek to 6000, kftvsa was stock (I also tried to zero for all columns - result was same), tvsag0 to 2.5 and it still pops for all the time.
It didn't matter if I used A/C or not.
(I have 1.8t AUM 06A906032HJ)
DNWEK is added to KFNWEGM. Which means there never will be fuel cut if AC is on. (If DNWEK is over 6000). Have you left KFNWEGM stock? It's also true this method doesn't work perfectly. Sometimes a pop or two slip through before fuel is actually cut I suppose. |
|
|
|
|
Logged
|
|
|
|
|
