NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > K boks to D boks
Pages: [1]
« previous next »
Author Topic: K boks to D boks  (Read 5318 times)
Denner
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« on: April 22, 2021, 02:03:40 PM »
Hi everyone I have bought an rs4 motor with wiring harness and control box but car will not start so have mounted my s4 wiring harness and the car can start with my s4 control box but not with my rs4 control box it is possible to copy rs4 k box to s4 D box and sorry my bad english
Logged
_nameless
Hero Member
*****

Karma: +374/-3463
Offline Offline

Posts: 3027
« Reply #1 on: April 22, 2021, 02:07:56 PM »
Quote from: Denner on April 22, 2021, 02:03:40 PM
Hi everyone I have bought an rs4 motor with wiring harness and control box but car will not start so have mounted my s4 wiring harness and the car can start with my s4 control box but not with my rs4 control box it is possible to copy rs4 k box to s4 D box and sorry my bad english
no start at all or start and die from immo? You can turn the immo off if thats the issue
Logged
UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
https://github.com/ugtuner05-sys
Denner
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #2 on: April 23, 2021, 09:00:54 AM »
Quote from: Marty on April 22, 2021, 02:07:56 PM
no start at all or start and die from immo? You can turn the immo off if thats the issue


Will not start I have made immo off
Logged
Jannik07
Full Member
***

Karma: +6/-8
Offline Offline

Posts: 86
« Reply #3 on: May 02, 2021, 12:58:27 PM »
Hello,

Can you reach the K-Box with VAG COM or something when its attached?

K box wont work with S4 Harness because it has more Sensors and/or other pin layout.
Logged
prj
Hero Member
*****

Karma: +1111/-544
Offline Offline

Posts: 6196
« Reply #4 on: May 03, 2021, 02:20:40 AM »
Quote from: Jannik07 on May 02, 2021, 12:58:27 PM
K box wont work with S4 Harness because it has more Sensors and/or other pin layout.
Misinformation. It will work just fine, as long as a few things are re-configured.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Jannik07
Full Member
***

Karma: +6/-8
Offline Offline

Posts: 86
« Reply #5 on: May 03, 2021, 05:21:16 AM »
I apologize. But I remembered its no plug and play solution.
Logged
prj
Hero Member
*****

Karma: +1111/-544
Offline Offline

Posts: 6196
« Reply #6 on: May 03, 2021, 06:29:11 AM »
Quote from: Jannik07 on May 03, 2021, 05:21:16 AM
I apologize. But I remembered its no plug and play solution.

It is.
You will have DTC's for airbox flap and one half of NWS, but this is literally a couple eskonf bits to flip to turn off.

I've been running 551K on every single car, no issues.
OP has different problem.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • September 07, 2026, 01:23:22 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.009 seconds with 14 queries. (Pretty URLs adds 0s, 0q)