|
Sandstorm3k
|
 |
« Reply #30 on: May 27, 2021, 01:44:03 AM »
|
|
|
You can search for them, but you can also make these changes in plain hex. With the answer i provided you i think you should be able to resolve your issue within an hour.
|
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
 Offline
Posts: 92
|
|
« Reply #31 on: May 27, 2021, 01:49:22 AM »
|
|
|
I'll help out for a bit, with all the info on the forum such problems are easily solved.
I've looked at your bin and found your ESKONF at 0x10BA2
00 30 BF FC 00 03 C3 FF AA FA FA FF CC 4.2 V8 ESKONF configuration is on the forum, using this knowledge we only need to change bit 5 like so;
00 30 BF FC 30 03 C3 FF AA FA FA FF CC (bit five 00 00 00 00 becomes 00 11 00 00)
Now all you need to do to complete this delete is find MSLUB and MSLBAS and then zero them out. (alternatively CDSLS and CWKONABG will work too but is not preferred for a full delete). Finding these two will also probably be extremely easy as you really only need to compare with a known defined file.
All this info comes pretty much straight from the forums and wiki, you just need to find it.
I carnt see it lol . It's been years since I've done this and I wasn't the best back then Sent from my CPH1931 using Tapatalk |
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #32 on: May 27, 2021, 01:58:27 AM »
|
|
|
This is where I am at the minute on hex editor . If I can understand that I think I can work the rest out  Sent from my CPH1931 using Tapatalk |
|
|
|
|
Logged
|
|
|
|
|
Sandstorm3k
|
|
« Reply #33 on: May 27, 2021, 02:04:50 AM »
|
|
|
Also; for the love of god please post screenshots its 2021.
Change your bytes per row as so: View > Bytes per row > 16 makes life a bit easier.
Now go back to my post and see your ESKONF served on a silver platter.
|
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #34 on: May 27, 2021, 02:19:52 AM »
|
|
|
Also; for the love of god please post screenshots its 2021.
Change your bytes per row as so: View > Bytes per row > 16 makes life a bit easier.
Now go back to my post and see your ESKONF served on a silver platter.
Lol your dangling a carrot . I've gone down to 16 bytes now . Any more clues Sent from my CPH1931 using Tapatalk |
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #35 on: May 27, 2021, 02:21:08 AM »
|
|
|
And I no it's 2021 lol . But I don't no how to screen shot it
Sent from my CPH1931 using Tapatalk
|
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #36 on: May 27, 2021, 03:09:50 AM »
|
|
|
Jesus christ @ this thread.
Just pay someone to do it, you shouldn't be anywhere near an ECU.
|
|
|
|
|
Logged
|
|
|
|
|
bamofo
|
|
« Reply #37 on: May 27, 2021, 01:19:40 PM »
|
|
|
Jesus christ @ this thread.
Just pay someone to do it, you shouldn't be anywhere near an ECU.
It looks like he did already according to the rom he sent me. Looks like a facebook special. All the systems are set to 0, timing is way high and they adjusted things a bit incorrectly. |
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #38 on: May 27, 2021, 03:00:54 PM »
|
|
|
It looks like he did already according to the rom he sent me. Looks like a facebook special. All the systems are set to 0, timing is way high and they adjusted things a bit incorrectly.
Pardon . I no nothing about it . My crank mains seal went and I'm in the middle of replacing it. And I thought while I was there I could get the secondary air pump deleted . I've no idea how to tune ME7 Sent from my CPH1931 using Tapatalk |
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #39 on: May 27, 2021, 03:02:58 PM »
|
|
|
Jesus christ @ this thread.
Just pay someone to do it, you shouldn't be anywhere near an ECU.
Pardon . That's just plain rude . I asked for help that's all. I've done nothing wrong. Sent from my CPH1931 using Tapatalk |
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #40 on: May 27, 2021, 03:06:50 PM »
|
|
|
Cheers for your help people . I never knew the ecu is the way it was. If I did I wouldn't be asking how to turn something off now would I .
I don't even no what's been turned to 0 or anything about the timing ! I've only owned the car since February
Sent from my CPH1931 using Tapatalk
|
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #41 on: May 27, 2021, 03:27:34 PM »
|
|
|
Jesus christ @ this thread.
Just pay someone to do it, you shouldn't be anywhere near an ECU.
No need for your negative comments thankyou I've never tuned ME7 if I did I wouldn't be asking here . Sent from my CPH1931 using Tapatalk |
|
|
|
|
Logged
|
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #42 on: May 27, 2021, 03:47:34 PM »
|
|
|
Im gonna read these and hopefully come back with the answers to you |
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #43 on: May 27, 2021, 08:24:12 PM »
|
|
|
eskonf is at 0x10ba2
prokon starts at 0x18194 and someone bastardised the table looks like volta or some shit. Find a stock tune and start over this is a garbage file
|
|
|
|
« Last Edit: May 27, 2021, 08:45:00 PM by Marty »
|
Logged
|
Giving your mom a tuneup
|
|
|
Rick81
Full Member
Karma: +0/-11
Offline
Posts: 92
|
|
« Reply #44 on: May 27, 2021, 11:52:44 PM »
|
|
|
eskonf is at 0x10ba2
prokon starts at 0x18194 and someone bastardised the table looks like volta or some shit. Find a stock tune and start over this is a garbage file
Your right there i had good help from a gentleman on here called Bamofo good bloke and sorted it out for me |
|
|
|
|
Logged
|
|
|
|
|
