Pages: [1]
Author Topic: 1.8T AEB '96 Audi A4 B5  (Read 4219 times)
WaLnUtZ23
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« on: May 23, 2021, 02:33:35 PM »

Hey guys! I read some other threads about the ECUs on early B5s of not being flashable like mine  8d0907557T. I saw that some guys said that ECUs from AGU engines( a3 and golf) are plug and play + flashable througH OBD II on AEB. Is it true? If so what part numbers ECUs can I buy for my b5. Thanks! And cheers!
Logged
Auriaka
Full Member
***

Karma: +17/-9
Offline Offline

Posts: 113



« Reply #1 on: May 23, 2021, 06:16:24 PM »

I flash these... Reading them is MPPS or unsoldering chip however

North America spec aeb me5 9.2
Logged
_nameless
Hero Member
*****

Karma: +374/-3442
Offline Offline

Posts: 3008



« Reply #2 on: May 23, 2021, 09:44:34 PM »

I flash these... Reading them is MPPS or unsoldering chip however

North America spec aeb me5 9.2
You cant read them with mpps. Only program
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
WaLnUtZ23
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #3 on: May 24, 2021, 01:40:48 AM »

You cant read them with mpps. Only program
what? But it is m3.8.2 (on 557t at least) and i ve read that they cannot be flashed trough obd2,only by desoldering.
Logged
WaLnUtZ23
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #4 on: May 24, 2021, 01:42:26 AM »

what? But it is m3.8.2 (on 557t at least) and i ve read that they cannot be flashed trough obd2,only by desoldering.
that s what i know too, m5.9.2 can be flashed trough obd2 but not read.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.01 seconds with 14 queries. (Pretty URLs adds 0s, 0q)