KFMIOP NEEDS AN ADDITIONAL 180 COLUMN

Pages: 1 [2]

« previous next »

Author

Topic: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN (Read 7107 times)

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #15 on: May 25, 2021, 12:42:32 PM »

LAMFA bad too rich I am just learning I am open to any suggestions.I have not matched everything, the top-up will be reduced at the beginning I will be uploading weaker maps this is too drastic at the beginning Now the car is soft with 1.1 bar topping down to 0.9 bar at 6500 rpm.


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #16 on: May 25, 2021, 12:50:50 PM »

Such a lamfe in this car was made 5 years ago by the well-known Polish tuner Gregor10


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #17 on: May 25, 2021, 12:52:19 PM »

LAMFA BY GREGOR10


	Logged

pinokio1979

Full Member

Karma: +0/-2
Offline

Offline

Posts: 89

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #18 on: May 26, 2021, 05:12:42 AM »

Hello, I read a bit after your suggestion that the lamfa is bad and I did it, see if I'm still in the forest.


	Logged

bamofo

Sr. Member

Karma: +34/-3
Offline

Offline

Posts: 420

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #19 on: May 26, 2021, 10:37:23 AM »

Quote from: pinokio1979 on May 26, 2021, 05:12:42 AM

Hello, I read a bit after your suggestion that the lamfa is bad and I did it, see if I'm still in the forest.

If you havent gotten anything dialed in correctly then you should set most of it to a static value till you get the corrections right. I also start making lambda richer around 40% load up so it helps a bit on shifts and such. but idk if that helps at all.


	Logged

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #20 on: May 27, 2021, 09:47:12 AM »

Quote from: bamofo on May 26, 2021, 10:37:23 AM

I also start making lambda richer around 40% load up so it helps a bit on shifts and such. but idk if that helps at all.

It helps with making the fuel consumption shit. Other than that, nope.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

bamofo

Sr. Member

Karma: +34/-3
Offline

Offline

Posts: 420

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #21 on: May 27, 2021, 01:18:06 PM »

Quote from: prj on May 27, 2021, 09:47:12 AM

It helps with making the fuel consumption shit. Other than that, nope.

There is a part load table on the cars i mentioned and it targets 1 for those cases.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #22 on: May 29, 2021, 10:20:20 AM »

There is no need to touch LAMFA unless you are running crap gas with a lot of boost.

Also, there is no need for all caps. Stop shouting. It is extremely rude to think your post deserves more attention than others


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: KFMIOP NEEDS AN ADDITIONAL 180 COLUMN « Reply #23 on: May 29, 2021, 10:21:13 AM »

Quote from: prj on May 27, 2021, 09:47:12 AM

It helps with making the fuel consumption shit. Other than that, nope.

Exactly.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 01:51:20 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search