It is possible to convert vag k+kommander cable to use with me7logger?

Pages: [1]

« previous next »

Author

Topic: It is possible to convert vag k+kommander cable to use with me7logger? (Read 4234 times)

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	It is possible to convert vag k+kommander cable to use with me7logger? « on: May 28, 2021, 01:49:31 PM »

I have vag k commander 1.4 cable, nefmoto flasher work like a charm. But Me7logger say error code 4, no connection to ECU?
Also VCDS lite doesen't work, when i go to test it say okay, but i can not connect to ECU.
With K commander software I can connect to ECU
Is it possible to make some changes on cable so it can work with ME7logger and vcds lite?


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: It is possible to convert vag k+kommander cable to use with me7logger? « Reply #1 on: May 28, 2021, 03:06:41 PM »

I desolder PIC MCU from this cable.
After that nefmoto flasher still work, but from logger now I get message "error 1" no echo from cable.
Than I change setings in logger (look in attachment) and it works Cheesy


	Logged

stuydub

Full Member

Karma: +25/-12
Offline

Offline

Posts: 230

	Re: It is possible to convert vag k+kommander cable to use with me7logger? « Reply #2 on: May 28, 2021, 03:13:05 PM »

My 1.4 cable works with logger and vcds


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: It is possible to convert vag k+kommander cable to use with me7logger? « Reply #3 on: May 30, 2021, 05:42:45 AM »

Can you take a picture of board?
Mine still doesen't work with vcds lite. But nefmoto and me7logger work like a charm


	Logged

stuydub

Full Member

Karma: +25/-12
Offline

Offline

Posts: 230

	Re: It is possible to convert vag k+kommander cable to use with me7logger? « Reply #4 on: May 30, 2021, 11:26:01 AM »

Quote from: BlackT on May 30, 2021, 05:42:45 AM

Can you take a picture of board?
Mine still doesen't work with vcds lite. But nefmoto and me7logger work like a charm


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: It is possible to convert vag k+kommander cable to use with me7logger? « Reply #5 on: June 01, 2021, 12:39:52 AM »

Hmm looks same like mine.
I got same message when I do test in vcds. But can't connect with any module

With what ECU you can connect with me7loggger and do you use SLOW 0x11 or slow 0x01?


	Logged

stuydub

Full Member

Karma: +25/-12
Offline

Offline

Posts: 230

	Re: It is possible to convert vag k+kommander cable to use with me7logger? « Reply #6 on: June 01, 2021, 01:04:39 AM »

Me7.5


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: It is possible to convert vag k+kommander cable to use with me7logger? « Reply #7 on: June 01, 2021, 06:44:14 PM »

If its an A4, or etc, always use slow 0x00(if using visualme7logger, you need to manually type it in , you cant choose it or save it) its needed because of the cluster/immo, ignition on, then connect then it works. Can confirm this is the only way me7logger works for me, even with ch340 bullcrap cable. Cant help with the vcds lite issue, never needed to use lite


« Last Edit: June 01, 2021, 07:06:27 PM by Blazius »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 07:45:13 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search