Pages: [1]
Author Topic: Can or Can't defeat immo 1,2 or 3 with Nefmoto??  (Read 8427 times)
Bluepower
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: May 13, 2012, 08:20:20 AM »

Following a argument on the VWVortex about defeating the immo, I was sure that it would be possible using Nefmoto software(I think on a bench flash??)
But now for the record:
Can you defeat the immo(either 1,2 or 3) using the Nefmoto software, yes or no??

And secondly: IF it can be done, would making a DIY be reasonable??

Kind regards

Niels
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: May 13, 2012, 08:32:05 AM »

no. nefmoto only reads/writes flash, not eeprom.
Logged
Bluepower
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #2 on: May 14, 2012, 09:41:26 AM »

Ok, so that's clear now...

What software/cable CAN read the Eeprom, and HOW to perform the immo defeat, does anyone know?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #3 on: May 14, 2012, 10:38:05 AM »

most universal method is to use a test clip/desolder and use a programmer.
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503


« Reply #4 on: May 14, 2012, 11:43:37 AM »

Ok, so that's clear now...

What software/cable CAN read the Eeprom, and HOW to perform the immo defeat, does anyone know?

Use the search function of the forum...
Logged
ejg3855
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 123


« Reply #5 on: July 19, 2012, 10:13:42 AM »

Use the search function of the forum...
http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)