NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > How to disable misfire detection at idle in L box ?
Pages: [1]
« previous next »
Author Topic: How to disable misfire detection at idle in L box ?  (Read 2649 times)
s4man111
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 33
« on: June 09, 2021, 01:29:15 PM »
Hey guys 2001 s4 b5 8D L box ecu. Can someone tell me how I can disable misfire detection at idle in this L box?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12269


WWW
« Reply #1 on: June 09, 2021, 01:35:07 PM »
For the purposes of LC/NLS? Does not belong here, and is an extremely difficult topic unless you are very good with C16 ASM
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
s4man111
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 33
« Reply #2 on: June 09, 2021, 02:08:00 PM »
Quote from: nyet on June 09, 2021, 01:35:07 PM
For the purposes of LC/NLS? Does not belong here, and is an extremely difficult topic unless you are very good with C16 ASM

ok, what parameter needs to be changed please?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12269


WWW
« Reply #3 on: June 09, 2021, 03:06:27 PM »
You didn't answer the question.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Norwegian1.8T
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 72
« Reply #4 on: June 09, 2021, 03:13:42 PM »
Taken from the S4Wiki, not sure if this is what you're meaning.

RLSALULL - Load threshold for shear detection for suppression of misfire detection during idle

If your load at idle is higher than RLSALULL, misfire detection is enabled.
Correct me if i'm wrong  Cheesy
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12269


WWW
« Reply #5 on: June 09, 2021, 03:49:51 PM »
Disabling misfire detection is not recommended, in general.

Even to avoid the emissions DTC, you're looking at an uphill battle.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Norwegian1.8T
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 72
« Reply #6 on: June 09, 2021, 04:09:47 PM »
The real question is why is your idle load so high?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 12:46:05 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)