Am unable to find the SKC from my Audi TT cluster dump.

I read it through VAG k+ Commander 1.4, with the setting: Mangeti Mareli - Direct

I searched through the dump for the AUZ, but the first two decimals are 2E 3A, and that is 11833, which is too long?

Thanks for help.

Thanks for taking the time!

When i try to login to Instruments (17) with the SKC i get "Login Code Not Accepted by Controller. You will have to turn the ignition OFF for awhile before trying again."

I have tried this with my kkl 409.1 CH340 cable. I have tried using VCDS lite 1.2, VCDS 3.11-2 (Activated).

I have been able to login to my ECU by using SKC (65535, since it's immo2) with both VCDS lite 1.2 and VCDS 3.11-2 with my KKL cable.

I also notice that everytime i read the eeprom from my cluster i get a slightly different dump, where some of the values have changed.

Any idea what the problem might be?

hi. can you find me pin from my dump?


edit: i find it 01226