Pages: [1]
Author Topic: diffrent sw vag number  (Read 2172 times)
chlenix1337
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: June 26, 2021, 11:17:25 AM »

what i want flash
Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 40/1/ME7.5/5/4016.32//24E/Dst03o/280703//
-> Contents of ECUID data table:
   - '0261208500'         (SSECUHN)         
   - '1037369011'         (SSECUSN)         
   - '8E0ABT518AS '       (VAG part number)
   - 'A003'               (VAG sw number)   
   - '1.8L R4/5VT    '    (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004'                           

my stock:

Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 40/1/ME7.5/5/4016.32//24E/Dst03o/280703//
-> Contents of ECUID data table:
   - '0261208500'         (SSECUHN)         
   - '1037369011'         (SSECUSN)         
   - '8E0909518AS '       (VAG part number)
   - '0003'               (VAG sw number)   
   - '1.8L R4/5VT    '    (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004'     

Can i flash it with no worries?
Logged
dream
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 92


« Reply #1 on: June 26, 2021, 12:07:18 PM »

And what is your question?
Logged
chlenix1337
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #2 on: June 26, 2021, 12:41:32 PM »

I want flash first soft but have other sw number.
2nd ecu info is my stock, and my question is can i flash 1st soft to my car
Logged
dream
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 92


« Reply #3 on: June 29, 2021, 12:26:17 PM »

Almost every part is the same.

I guess this file comes from ABT or someone marked it as ABT and also put an 'A' where the first '0' normally stands
Haven't seen the bin but I can assume the sw is exact the same.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)