NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Audi tt boost issue
Pages: [1]
« previous next »
Author Topic: Audi tt boost issue  (Read 2089 times)
8951ben
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« on: July 10, 2021, 03:33:28 AM »
Hi not sure if anyone can help. I have an audi tt bam engine with a stage 2 tune I get over boost of 21psi then drops suddenly to 16psi I have logged maf using vcds (3rd gear pull ) to redline I only get 206gs. I was expecting more with my mods. I have decat and scorpion catback proram filter oversize tip big front mount and forged rods. Is this normal boost behaviour for this type of tune or should I hold higher boost for longer
Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 402
« Reply #1 on: July 10, 2021, 06:26:19 AM »
These small framed turbo's don't make any useful power at or near redline i believe K04 023 holds a bit better boost up top compared to a K03s but definitely not until 7000rpm.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #2 on: July 10, 2021, 06:32:40 AM »
Quote from: 8951ben on July 10, 2021, 03:33:28 AM
Hi not sure if anyone can help. I have an audi tt bam engine with a stage 2 tune I get over boost of 21psi then drops suddenly to 16psi I have logged maf using vcds (3rd gear pull ) to redline I only get 206gs. I was expecting more with my mods. I have decat and scorpion catback proram filter oversize tip big front mount and forged rods. Is this normal boost behaviour for this type of tune or should I hold higher boost for longer
how about data logs?
Logged
Giving your mom a tuneup
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #3 on: July 10, 2021, 08:53:16 AM »
Quote from: 8951ben on July 10, 2021, 03:33:28 AM
Hi not sure if anyone can help. I have an audi tt bam engine with a stage 2 tune I get over boost of 21psi then drops suddenly to 16psi I have logged maf using vcds (3rd gear pull ) to redline I only get 206gs. I was expecting more with my mods. I have decat and scorpion catback proram filter oversize tip big front mount and forged rods. Is this normal boost behaviour for this type of tune or should I hold higher boost for longer

did you check the compressor map for your turbo before deciding on a boost level to use?
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 08:28:16 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 16 queries. (Pretty URLs adds 0s, 0q)