Hi,
a friend of mine has a Audi A4 B5 with 2.4 V6.
Ecu is: 3B0907552
B_Kuppl and B_Br are both stored in 0x00FD58 => 2C
Because it has automatic transmission and launch is only needed for fun, I replaced both occurrences of B_kuppl-bitmask with B_Br-bitmask in the code.
Additionally, I set the NLS RPM to 8000 - just in case, not needed in an automatic.
But after modification, launch is still not working.
Both brake pedal switch and coolant sensor are working, I double checked them.
Can anyone tell me, why it is not working?
