Pages: 1 2 [3]
Author Topic: Damos AUDI S8 4.2 or any 4.2  (Read 28084 times)
nyet
Administrator
Hero Member
*****

Karma: +604/-168
Online Online

Posts: 12236


WWW
« Reply #30 on: May 13, 2013, 09:17:32 PM »

heh. basically, get winols (the version we want to support) and keep exporting various lists of .kps until i have the whole format documented (or at least the parts that i need)

alternately, somebody could take a peek at my .kp parser and start by documenting THAT .kp format using my parser (yes its a pretty fugly hack) as a guide.

then, with that as a start, try to figure out what the differences are between that and the version we want to support.

If somebody comes up with the format of the .kp, i can adjust my .kp parser to match that spec.

Even if it isn't exact, getting a rough start would be very good.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640


« Reply #31 on: May 13, 2013, 09:36:05 PM »

heh. basically, get winols (the version we want to support) and keep exporting various lists of .kps until i have the whole format documented (or at least the parts that i need)

alternately, somebody could take a peek at my .kp parser and start by documenting THAT .kp format using my parser (yes its a pretty fugly hack) as a guide.

then, with that as a start, try to figure out what the differences are between that and the version we want to support.

If somebody comes up with the format of the .kp, i can adjust my .kp parser to match that spec.

Even if it isn't exact, getting a rough start would be very good.


I can export KP's for version 1.81, 2.24, and 3.46 ATM. You just want me to post a pile of KP's, exported as various versions, I can do that anytime.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« Reply #32 on: May 13, 2013, 11:53:12 PM »

so then mapdump wont work on my ols files I have been creating?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-168
Online Online

Posts: 12236


WWW
« Reply #33 on: May 14, 2013, 08:57:23 AM »

I can export KP's for version 1.81, 2.24, and 3.46 ATM. You just want me to post a pile of KP's, exported as various versions, I can do that anytime.

well, it is a bit harder than that. Sometimes i'm looking for a specific thing.. say, where is the "signed" bit for the y axis descriptor, and i'll export two versions of the same map, then use a hex editor to find the bit that flipped. So it is really more interactive. it is really time consuming and i could use some help doing it..

it really isn't difficult, just kinda menial.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)