_Bubik
Jr. Member
Karma: +1/-4
 Offline
Posts: 28
|
 |
« on: August 29, 2021, 05:39:19 AM »
|
|
|
Hi,
I need to help with more power to my car. I don´t know what can I do now.
First few informations...
Sorry for my English....xd
I am newbie in this, so please... if I´ll have something wrong...please correct me. But I am trying to understand all of these things.
It is Skoda Octavia 1.8t AUM
VW HW: 06A906032HJ
SW Bosch: 1037362287
HW Bosch: 0261207436
Original is 110kw, but there is some chip, so there was lamfa edited and little bit more things.
And there is 3inch downpipe to 2,5inch full. From hardware it is all.
I have already modified my soft. I have pops and bangs after 3500rpm, hardcut on 6400rpm, deleted SAI, rear lambda and now some "more power".
I spent lots of hours to study this topic, but I am still doing something wrong.
I want to from my car 1-1,1bar on turbo in peak and 0,85-0,9bar to redline, which I have it on 6400 via hardcut limiter. But I can´t beat 5200rpm with my specified pressure.
(I will post my logs, but I am not at home now.) I have specified boost about 0,92bar in 5500rpm and on 3th, 4th and 5th gear car shut down specified boost to 0,5bar and it does not want to go higher to end of rpms.
I edited:
KFMIRL- in problem sectors - in 5000-6500rpms - are values from 1.8t S3 APY
KFMIOP- edited really little bit, I can say "gently"...idk if I am able to modify this, on S4wiki say to not edit this, but here some people say it´s right to modify kfmiop, so I am confused
LDRXN- peak is 170 and in redline I have 158 and there is linear course
LDRXNZK- there are little bit smaller values than LDRXN
KFLDHBN- there are little bit bigger values than have APY on 5000-6500 range at -9 to 70 on Y axis
This is all, because lamfa for example was edited from previous human from that chip.
From logs lamfa looking good, there aren´t knocking.
What can I do more for my specified boost?
Please help and be criticall. I want to know these things right.
Is here anybody which have AUM/AUQ with GOOD and SAFE stage 1? I really want to see that soft and learn it more.
Regards
|
