NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Anyone could check my .bin for Proper N112/RearO2/N249/SAI Delete? 06A906032HN
Pages: [1]
« previous next »
Author Topic: Anyone could check my .bin for Proper N112/RearO2/N249/SAI Delete? 06A906032HN  (Read 2487 times)
Fabioo
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 51
Hello, engine is in Golf GTI MK1 and all of those valves are removed from engine bay, trying to remove them from ECU.
The problem is i've had No Throttle Reponse and weird bounce idle with BIN NR:1.

BIN NR: 2 is my new proposition for tomorrow for flash is it correctly removed?

Definition for TunerPro and both Binaries with removed valves in attachment.

Error in ecu : P1297

Also on friend's ECU which he bought for alot $$ with all of the unnecessary stuff removed the car is working 100%.

Both Bins are Checksum corrected.
Thanks.
« Last Edit: September 29, 2021, 01:29:24 PM by Fabioo » Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
Make sure the ecu is not damaged. If the lambda sensors short out it burns up the ground trace for the throttle pedal
Logged
Giving your mom a tuneup
Fabioo
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 51
Quote from: Marty on September 29, 2021, 01:42:33 PM
Make sure the ecu is not damaged. If the lambda sensors short out it burns up the ground trace for the throttle pedal
Before those valve was removed from engine bay, the engine was runing fine on this ecu with only front o2 connected so i think its ok.
Logged
rysiektr
Jr. Member
**

Karma: +3/-3
Offline Offline

Posts: 47
In my opinion software as you try to modified is not a virgin flash.
Section PROKON was modified in both of this bin. files.
Additionally in file "No throttle response" from adres 0x0168D4 is sometring strange values.
I suggest to you search an vrgin flash for HN ecu and do all mods from the begining.
Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 402
Attached a stock calibration 032HN file with N249/N112/SAI/rear o2 delete.

Enjoy
Logged
Fabioo
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 51
Quote from: rysiektr on October 01, 2021, 05:46:29 AM
In my opinion software as you try to modified is not a virgin flash.
Section PROKON was modified in both of this bin. files.
Additionally in file "No throttle response" from adres 0x0168D4 is sometring strange values.
I suggest to you search an vrgin flash for HN ecu and do all mods from the begining.
I did another Try with file found on the web (STOCK) but without success, i've had 0 Errors (none DTC removed) and engine wont rev.
But i have managed to clone 2nd ecu which Friend had edited (all of those valves removed) and it is working now, no idea what was wrong in my file...
Logged
blairl
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 69
Quote from: Sandstorm3k on October 01, 2021, 08:00:51 AM
Attached a stock calibration 032HN file with N249/N112/SAI/rear o2 delete.

Enjoy

I've been researching how to do this on my 032HS and this gives me a great sanity check. Thanks for posting this!
Just compared to the stock file http://nefariousmotorsports.com/forum/index.php?topic=286.0
Logged
Quote from: jibberjive on March 31, 2012, 03:31:19 PM
LAMFAWKR, did anyone else find this variable funny?
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471
It is a symthome of a burned ecu. I think the ground for throttle and lambda sensor is down!
Logged
popmpas
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
if u fail the eskonf map u can get no response from pedals.
when im tryed to copy eskonf values to eskonf1 and flashed to car i got same problem.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 04:49:56 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0s, 0q)