Hello doez anybody sniffed can messages for cruise conttrol stalk on b6 , b7 ,4f ,4e i have tried but with no sucsess , connected direct to steering wheel electronics on 500 kbps powertrain bus and  convince 100 kbps bus but module keeps silent or dont transmit commands till vcds ask . I have tried modifying CWGRABH but ecu sees only master switch byte nothing else . Or i have to call them like vcds but im affraid that can breakdown comunication when diagnostic is active .

Looking fot id and data for set,reset resume and similar to add it in micrococontroller and activate separate pin like standart m7.1.1 2.7tt Ecu.

CAN CC wont work on me 7.1.1

Did your steering wheel, steering wheel module come from a car that used CAN for CC controls?

2.7tt is swapped in a6 4f thanks to marty and prj it works with 6hp19a auto gearbox .  BlackT i have downloaded it and splitet do 3 parts for translate . I cant belive how stupid i am that i dont read this document before everything else . Thank you guys.