Pages: [1]
Author Topic: VAG 4.0TFSI MED17.1.1 software versions without LAMFA SECTION.  (Read 1652 times)
Rocky
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 24


« on: November 24, 2021, 05:40:47 AM »

Hi friends

-What strategy of tuning do you take if there is no LAMFA SECTION in the software?

-Have you functionrahmen to this ECUsoftware without LAMFA?

WITH LAMFA:
AUDI S6 4.0V8TFSI CEUC 420HP MED17.1.1 MY2013
4G0906014_0009

WITHOUT LAMFA:
AUDI S6 4.0V8TFSI CEUC 420HP MED17.1.1 MY2013
4G0906014B_0009

https://we.tl/t-pGGpHLdrCe

BEST REGARDS

« Last Edit: November 24, 2021, 05:44:10 AM by Rocky » Logged
prj
Hero Member
*****

Karma: +903/-420
Online Online

Posts: 5789


« Reply #1 on: November 24, 2021, 12:24:10 PM »

Just use BTS.
A bit scary that you are working with these and need to ask though.

Those engines are pretty expensive.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
jcsbanks
Full Member
***

Karma: +15/-3
Offline Offline

Posts: 125


« Reply #2 on: November 24, 2021, 02:38:12 PM »

None of the up to date MED17.1.1 for any C7 or C7.5 S6 anywhere in the world have LAMFA.

I found two early MED17.1.1 in a 4T that still had LAMFA for which I could not find a later update.
Logged
Rocky
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 24


« Reply #3 on: February 23, 2022, 02:28:39 AM »

Just use BTS.
A bit scary that you are working with these and need to ask though.

Those engines are pretty expensive.

i'm asking because in versions without lamfa i have to lower BTS temp to earlier activate BTS map before boost peak.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)