Pages: [1]
Author Topic: Can you add traction control?  (Read 1985 times)
tadope
Full Member
***

Karma: +2/-25
Offline Offline

Posts: 221


« on: December 21, 2021, 10:45:04 AM »

225 audi tt. Wb swap. Non esp car.
Bam h bin file.   

Is there a software traction control that can be added?
Maybe something that controls traction via throttle or ignition or anything?
Not physically braking the car because i have no esp system.
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #1 on: December 21, 2021, 11:27:24 AM »

Progressive ign cut based on delta rpm. But probably you are not going to be able to code that.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
fknbrkn
Hero Member
*****

Karma: +185/-23
Online Online

Posts: 1454


mk4 1.8T AUM


« Reply #2 on: December 21, 2021, 11:36:58 AM »

There is a can message from abs with speeds of all 4 wheels
So you can made your own asr
Good luck!
Logged
tadope
Full Member
***

Karma: +2/-25
Offline Offline

Posts: 221


« Reply #3 on: December 21, 2021, 07:48:07 PM »

Darn. Ok well at least its something that can be done. But heah. Not by me.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 18 queries. (Pretty URLs adds 0s, 0q)