Pages: 1 [2]
Author Topic: fixed WGDC low boost K04  (Read 6606 times)
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #15 on: December 29, 2021, 02:40:40 PM »

So i can get throttle cut caused by deviation although i drove fixed WGDC? I thought LDR gets deactivated when KFLDRAPP is used?


Good question, i'd have to look at the FR
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
zCruuz
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 80


« Reply #16 on: December 29, 2021, 03:09:31 PM »

Good question, i'd have to look at the FR
I did a quick search in FR for CWMDAPP when you mentioned throttle cut. The only chapters that i found related are

-FUEDK 21.90 : fixed value for CWMDAPP deactivates torque and links throttle with pedal
-LDRUE 30.30/LDTVMA 21.10 : whole LDR can get deactived through CWMDAPP

I attached the file i flashed, maybe the error is in there.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #17 on: December 30, 2021, 06:35:30 PM »

So i can get throttle cut caused by deviation although i drove fixed WGDC? I thought LDR gets deactivated when KFLDRAPP is used?


CWMDAPP( 8 ) does indeed disable whole PID which you should use for a fixed wgdc run , but however it doesnt disable all the other components, so you can have issues with requested boost, underboost and overboost and you get throttle cut,  even if you are only doing a test. Its pretty funky.
« Last Edit: December 31, 2021, 06:38:19 AM by Blazius » Logged
zCruuz
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 80


« Reply #18 on: March 20, 2022, 08:48:45 AM »

problem is found.

N75 was bad, only allowed about 1 bar boost.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)