Hey guys,

I have the same issue the second time now...

I swapped the ecu from 512kb to 1mb on a 1,8t.

Everything is fine, car runs great, tune works etc.

But I can't set the speed on the cruise control switch.
I think it is a communication issue or a coding problem in the software.

Anyone got some ideas?

All codings I know for the gra are the same as on every 1mb 1,8t I ever made based on the file...

Even gear ratio issues should allow me to activate it. I run a S3 base on a a4 b5 with 5 speed gearbox and even there the cruise control worked / let me set speed without changing the gear ratio. But in this case both are similar 6 speed.

Perhaps there is some communication through the cluster which doesn't work because of missing can messages.

The wiring is good. They all use the same pins at the ecu.

It is one apx and one app turned to 1mb ecu. Both react on the main switch of the cruise control but I can't set the speed so the cruise control don't work.

I'm pretty sure it is no wiring issue and no Ecu issue it self (if I put the ecu on a 1mb car it works without problems)

So there must be a difference in the cruise control function it self from 512kb to 1mb I guess.

Idk what you mean. If you could explain? Is there a difference in speed signal from 512lb to 1mb what I have to change?