Pages: [1]
Author Topic: ME7.9.10 tjet  (Read 1989 times)
mdb
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« on: January 13, 2022, 05:20:42 AM »

Hi, i am tuning an Abarth Gpunto 180SS -Me7.9.10ecu -, with more engine modifications:
-racing cams, gtx2860, external wg, custom exaust 70mm, big fmic and air filter, 1000cc iniectors.
I have a questione regarding iniectors: they are bosch 0280158040, and  i having a trouble to set my KRKTE TEMIN and TVUB.
I calculated a krkte of 0.02751, but car run poor and lean. Now, i am trying to setup idle @1500rpm (due to racing profile cams). I can't find TVUB and TEMIN, vendor of injectors doesn't have any tecnichal documentation...
Can someon help me?
Thanks in advance.
Logged
usabug
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #1 on: January 13, 2022, 05:24:30 AM »

0280158040

http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=12470.0;attach=32364


Also , racing cams ? duration and lift on 1mm ?
« Last Edit: January 13, 2022, 05:42:43 AM by usabug » Logged
mdb
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #2 on: January 13, 2022, 06:28:22 AM »

Many many many thanks ford your help and documentation!
Cams Spec in image attached.
Logged
usabug
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #3 on: January 13, 2022, 08:40:29 AM »

Those are not Racing Cams ... They just name them "Racing" .
Duration on Valve seat In:262° / Ex: 246° with LSA at 105° .

Just put the idle at 900~950sal and increase the two first columns of kfmres/k from 2% to 4~4.5% and the idle will be steady .
Logged
mdb
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #4 on: January 13, 2022, 10:20:28 AM »

Many thanks, cams was bought from the customer. I am working on stage with correct TVUB . Idle setup at 1700rpm (only for test). Krkte 0.039.
Logged
mdb
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #5 on: January 16, 2022, 10:49:10 AM »

Hi, then, a report.
i calculated my TVUB and (if i haven't done errors)
V & msec
5.63 3.73
7.04 3
8.45 2.17
9.86 1.73
11.26 1.42

Now, i am having some trouble with KRKTE calculation, bosch documentation says injectors are 980cc @3bar, abarth tjet fuel pressure is 3.5bar, i ve found on google that these iniectors are capable of 1150cc @4bar, then i calculated KRTE for 1070cc @3.5bar...krkte is 0.0235.
Now, starting the car is difficulty, then i set idle @1000rpm how you suggest, and increasing more KFMRES/K correction map.
To start the car i've to press a little gas pedal, car don't reach idle and die...afr meter is rich....i am strugling
« Last Edit: January 16, 2022, 11:03:25 AM by mdb » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)