calibrate injectors 3bar to 4bar fuel pressure

Pages: [1]

« previous next »

Author

Topic: calibrate injectors 3bar to 4bar fuel pressure (Read 3933 times)

Alexcsi

Newbie

Karma: +0/-8
Offline

Offline

Posts: 12

	calibrate injectors 3bar to 4bar fuel pressure « on: January 17, 2022, 02:07:13 AM »

Hello,

hope my English ist now better.

Can someone calibrate the Original injectors for my tune ?

ECU: ME7.5
Engine Code: ARZ

I have a AEM lambda and the 0.5v from 3000rpm to 4600rpm
3 bar fuel pressure regulator to 4 bar

Kind regards


	Logged

fknbrkn

Hero Member

Karma: +224/-28
Offline

Offline

Posts: 1567

mk4 1.8T AUM

	Re: calibrate injectors 3bar to 4bar fuel pressure « Reply #1 on: January 17, 2022, 03:35:49 AM »

Thats over optimistic filename


	Logged

nupustas

Full Member

Karma: +3/-10
Offline

Offline

Posts: 122

	Re: calibrate injectors 3bar to 4bar fuel pressure « Reply #2 on: January 17, 2022, 07:06:57 AM »

Quote from: Alexcsi on January 17, 2022, 02:07:13 AM

Can someone calibrate the Original injectors for my tune ?

why not do it yourself? https://s4wiki.com/wiki/Tuning


	Logged

360trev

Full Member

Karma: +71/-10
Offline

Offline

Posts: 236

	Re: calibrate injectors 3bar to 4bar fuel pressure « Reply #3 on: January 28, 2022, 01:20:25 PM »

This *may* help depending on how far you've studied so far

SSECUHN : 0261206435 : systemSupplierECUHardwareNumber SSECUSN : 1037352035 : systemSupplierECUSoftwareNumber DIF : 06A906032AS : .. BRIF : 0001 : .. OTHERID : 1.8L R4/5VT : .. EPK: /1/ME7.5/5/4013.00//F21dw/Dst01g/030599/

Code:

-[ KRKTE Airmass to injector 'on time' conv. based on inj size & fuel pressure]-----------------

        Calculation of constant KRKTE:
        ------------------------------
        rho0Air  = 1.293 [g/dm3]  (0 Deg C and 1013hPa)
        Vhzyl    =         [dm3]  Displacement of a cylinder in dm3

        Lst      = 14.7 AFR        Air/fuel ratio for Lambda = 1.0
        Normmk   = 0.00001667      min/ms Adaptation of units
        Qstat    = g/min           Valve constant with n-Heptane
                                   1.05 Valve correction for petrol/n-Heptane

        Calculation:
        ------------
                                 rho0Air [g/dm3 ] * Vhzyl[dm3 ]
              KRKTE [ms/%] = --------------------------------------------------
                             100[%] * Lst * Normmk[min/ms] *1.05 * Qstat[g/min]

              KRKTE        = 50.2624 * Vh / Qstat

>>> Scanning for KRKTE Lookup code sequence...

KRKTE           @ ROM:0x818C9B RAM:0x007B9CBB File-Offset:0x18C9B    (seg=0x0206 [segadr=0x818000] val=0x0C9B)
0x30 (0.1024 ms/%)


-[ TEMIN : Minimum effective injection time ]-----------------------------------

Searching for RKTI_CalcInjectionTimeFromFuelMass_syns()
Succeeded

TEMIN           @ ROM:0x81A54E RAM:0x007BB56E File-Offset:0x1A54E    (seg=0x0204 [segadr=0x810000] val=0xA54E)
TEMIN : 0.0000 ms : 0 (0x0)

-[ TVUB Battery Voltage Correction () ]---------------------------------------------------------

>>> Scanning for AES Injection output
AES references: CWPKAPP,pses_w,FRLFSDP,PSAPES,TVUB,KRKTE

>>> Scanning for TVUB - Fuel Injection time offset in ms (compensates for fuel injector latency)
Succeeded

Searching for AES_100ms_CalcFuelInjectionTime()
Succeeded

TVUB
    Long identifier:           Fuel Injection Battery Voltage Correction.
    Display identifier:        Not Defined
    Cell Address:              0x1FCC2
    Value:

 No.           |        0        1        2        3        4
            PHY|   7.9552   9.9968  11.9680  14.0096  15.9808
            ADR| 0x811F95 0x811F96 0x811F97 0x811F98 0x811F99
 --------------+---------------------------------------------
            PHY|   0.4160 157.2832   0.4160 206.4992  12.9504
            ADR| 0x81FCC2 0x81FCC4 0x81FCC6 0x81FCC8 0x81FCCA


	Logged

doublerwest

Full Member

Karma: +5/-15
Offline

Offline

Posts: 179

	Re: calibrate injectors 3bar to 4bar fuel pressure « Reply #4 on: February 27, 2022, 05:15:43 AM »

Quote from: Alexcsi on January 17, 2022, 02:07:13 AM

What are the original size injectors at 3 bar?


	Logged

W357

_nameless

Hero Member

Karma: +374/-3442
Offline

Offline

Posts: 3008

	Re: calibrate injectors 3bar to 4bar fuel pressure « Reply #5 on: February 27, 2022, 07:30:08 AM »

Kekte × 0.17= x. Krkte - x= 4 bar krkte starting point at least. THIS IS AS SIMPLE AS IT GETS PEOPLE!


	Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

July 05, 2026, 08:07:15 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?