Pages: [1]
Author Topic: Simos 8.5 Counter Reset  (Read 1226 times)
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« on: January 22, 2022, 12:16:11 PM »

Hi I'm posting this in the Noob section because it's new to me. I have an SQ5 that I've been flashing a lot (personal vehical)... and the counter is up quite a bit. I have a backup from a while back but the counters were never set back to 0/1. Question is does someone have a guide or something to reference in getting the counters back to 0? From the help I've been provided so far its not as easy as MED17 / 9 / 7... If you can provide some insight or help me reset these i may be able to reverse the work myself... i may not. Its a hand out for sure unless you can point me to some information i can digest and learn on my own.

Car - 2014 Audi SQ5
ECU - Simos 8.5
ECUID - 8R0907551G-0007
EEPROM attached
Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #1 on: January 24, 2022, 10:23:13 AM »

Found them. Working through a solution that i hope works. Just waiting a few drive cycles to see if i get locked out.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.069 seconds with 16 queries. (Pretty URLs adds 0.004s, 0q)