Pages: [1]
Author Topic: Golf V GTI BWA MED9.1 which clone works the best ?  (Read 2380 times)
R3dsn0w
Newbie
*

Karma: +1/-7
Offline Offline

Posts: 19


« on: February 20, 2022, 07:23:24 AM »

Hello guys,

I'm from Germany and new to the Forum  Grin

So I have an Mk5 GTI already mapped from a good tuner to about 270hp and 440 Nm, I wanted to make pop and bang to the software but I have no tuning tool and wanted to know your experience for example with cloned tools like  Kess V2, I've read in other forums that the there are some problems with the corrected checksums and also with writing to the ECU,  so is there any favor from you or can I rechange the tuned file from my tuner at all?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #1 on: February 24, 2022, 10:25:09 AM »

mpps v18 is good for med9.1
Logged
Mk5gt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #2 on: February 26, 2022, 04:21:33 AM »

Used kess v2 clone several times with med9.1 without any problems.
If you worry about checksum, correct it with winols and then write the file to the ecu .

If you want post your file and i will add pops and bangs.
« Last Edit: February 26, 2022, 04:23:26 AM by Mk5gt » Logged
R3dsn0w
Newbie
*

Karma: +1/-7
Offline Offline

Posts: 19


« Reply #3 on: April 04, 2022, 03:15:59 AM »

Yeah thank you for your messages,

My friend has the mpps and the kess clone so I can get the file but can I rechange the tuned file or is there any protection on it?

And I also wanted to have the pops and bangs controlled at the climate button, so I can turn it on and off If I want to Cheesy
Logged
Mk5gt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #4 on: April 17, 2022, 02:02:48 PM »

No protection on ori file.
Make stg1 with winols, correct checksum and write the file to the ecu.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)