Pages: [1]
Author Topic: Nefmoto stops after 1% while flashing, any suggestions?  (Read 5099 times)
Jonas_R
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 2


« on: May 31, 2012, 10:17:08 AM »

Running Windows 7 Pro 32bit
Using Ross Tech VCDS drivers and original VCDS cable.
Audi A6 2.7T 2001 (250HK version)

Well I have now tried 2 chiness cables and 1 original VCDS cable but the same thing happens.

The flashing is stuck after 1%, and then nothing happens for a long time and then it times out.

ECU is still working fine but I just can't seem to flash it more then 1%.

I have attached a copy of the status window and the log file.

I have unchecked intelligent boot mode in VCDS.
Logged
Jonas_R
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 2


« Reply #1 on: May 31, 2012, 01:32:13 PM »

So a quick update.

Turns out my ECU has been crypto socketed by MTM.

Arg!!

So that explains my problems.

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.074 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)