Pages: 1 [2]
Author Topic: 2.0 TFSI BWA 1037387479 1K0907115J XDF  (Read 10959 times)
agron25
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 65


« Reply #15 on: August 01, 2023, 03:40:42 AM »

here are the addresses for those who are interested
KLPRMAX 1D92D8
VHDP 1D932E
RQUAHDPK 1D8932
SKHDPMX 1D8934
PGBDVHDO 1D8D3C
KLPROV 1D20CC
PRNL1 1D8ED8
Logged
agron25
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 65


« Reply #16 on: August 01, 2023, 03:42:14 AM »

I am looking for the MDNORM address
thanks
Logged
eg4
Jr. Member
**

Karma: +3/-2
Offline Offline

Posts: 27


« Reply #17 on: August 01, 2023, 03:54:46 AM »

mdnorm is at 1C62F3
Logged
agron25
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 65


« Reply #18 on: August 01, 2023, 04:52:52 AM »

thanks EG4  Wink
conversion 10/1 ?
Logged
eg4
Jr. Member
**

Karma: +3/-2
Offline Offline

Posts: 27


« Reply #19 on: August 01, 2023, 08:29:49 AM »

yes 400Nm
Logged
agron25
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 65


« Reply #20 on: August 01, 2023, 12:15:34 PM »

yes thanks eg4  Wink
small question, I put a rail pressure sensor of 200 bars, is there a table to modify?
KLPRAIL ? you have adress
« Last Edit: August 01, 2023, 12:39:33 PM by agron25 » Logged
agron25
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 65


« Reply #21 on: August 02, 2023, 08:46:07 AM »

KLPRAIL adress is 1D8F16
conversion 0.0005
Logged
agron25
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 65


« Reply #22 on: August 02, 2023, 11:28:30 AM »

I am looking for the KLMIMAX address?
thanks
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)