Pages: [1]
Author Topic: AUDI A4 B5 1.8T (AEB) 8D0 907 557P ORI FILE REQUEST  (Read 4097 times)
WaLnUtZ23
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« on: March 25, 2022, 07:05:14 AM »

Hello guys!! Can anybody help with an original file for  this ecu? It is an us model ecu 8D0 907 557P Bosch m5.9.2.    0 261 204 258(all info is in the photo that i have attached) . Thanks!
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654


« Reply #1 on: March 25, 2022, 03:01:17 PM »

8D0 907 557P Bosch m5.9.2.    0 261 204 258

Here is it...
Logged
WaLnUtZ23
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #2 on: March 26, 2022, 01:38:32 AM »

Thank you mate!!
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654


« Reply #3 on: March 26, 2022, 04:06:08 AM »

Might be good to know.
Firmware update versions D04, D06 and D07 have been released.
Any can be used instead of D02.
This is the latest...
Logged
WaLnUtZ23
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #4 on: March 26, 2022, 05:14:19 AM »

So if I use this map on my D02 ecu, the car should still be fine right? I mean these are just updates, no major differences between them?
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654


« Reply #5 on: March 26, 2022, 06:54:22 AM »

So if I use this map on my D02 ecu, the car should still be fine right?
Yes
I mean these are just updates, no major differences between them?
The manufacturer has made some adjustments to improve engine performance based on service responses.
D02 is the first release in 1997, and D07 is done in 1999.
Logged
WaLnUtZ23
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #6 on: March 26, 2022, 04:56:18 PM »

YesThe manufacturer has made some adjustments to improve engine performance based on service responses.
D02 is the first release in 1997, and D07 is done in 1999.
thank you for the explanation friend! Can i tune this with ECM TITANIUM? I don't thin it got drivers for this
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)