Dev Blog
Forum
Wiki
About
NefMoto
>
ECU Files
>
ECU Definition Files
>
ECU Definition File Requests
>
Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT)
Pages: [
1
]
« previous
next »
Author
Topic: Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT) (Read 3532 times)
EcuMan
Newbie
Karma: +0/-1
Offline
Posts: 7
Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT)
« on: March 30, 2022, 04:39:06 AM »
Hello guys,
I try to create Pops & Bangs for my Audi A4 B6 2.0 ALT (automatic gearbox) with A/C on but I'm not able to find the right DNWEK value. I found one with the stock value 80 rpm and changed it to 8000 rpm but it's not working. CWSAWE, KFTVSA and KFNWEGM would be also nice. Maybe someone can help me out?
Thank you very much!
«
Last Edit: March 30, 2022, 04:43:39 AM by EcuMan
»
Logged
TFRAG
Newbie
Karma: +0/-0
Offline
Posts: 4
Re: Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT)
« Reply #1 on: April 23, 2022, 05:23:17 AM »
Hi, I did it on my car, but through other cards, if interested, I can share my experience.
Logged
adam-
Hero Member
Karma: +124/-33
Offline
Posts: 2179
Re: Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT)
« Reply #2 on: April 23, 2022, 12:41:28 PM »
Quote from: TFRAG on April 23, 2022, 05:23:17 AM
Hi, I did it on my car, but through other cards, if interested, I can share my experience.
You'd have been quicker 'sharing your experience' than typing that.
Logged
TFRAG
Newbie
Karma: +0/-0
Offline
Posts: 4
Re: Need damos for ME7.5.5 0261207754 1037363476 8E0909557E (Audi A4 B6 2.0 ALT)
« Reply #3 on: April 30, 2022, 08:06:08 AM »
Here are all the addresses that need to be changed
CWSAWE - $ 11969 (возможно, должны быть протестированы nulls рядом с этим адресом)
KFZWMN - $ 125F1
KFTVSA - $ 198A7
KFTVSAKAT - $ 198CF
CWSAWE you need to change the value of 0 to 1
KFZWMN minimum ignition after 3000ob/min the last two lines at low loads are -19.5 and the third from above is -9.75 for a smooth transition
KFTVSA delay time 1.5sec after 3000ob/min
on the second KFTVSAKAT card as well, only here in ms
Here is my firmware, the machines are the same, there are already all the changes, but I'm not sure about CWSAWE
But it seems to have too big angles
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 26, 2024, 12:59:14 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
