Hello,

my dad recently bought a VW Caddy from 2011(2k facelift 86 BHP version) second hand, so I went and did some logs to make sure the engine is healthy. I did a pull in 3th gear and I see 2 things that I have questions about.

First; the torque goes as far as 228Nm around 4k RPM, the engine is labeled as 150Nm, and the boost goes up to around 2000 mbar, with VCDS being VCDS this is around 1bar of boost pressure. I have a feeling this means its chipped, correct? I understand that these reading are never 100% correct, but the margin is to big to go unnoticed.

Second; when I let go of the gas after the pull, I see that the knock sensors read up to 4V on the 4th cyl. Is this something to be worried about?