Pages: [1]
Author Topic: 1.8t awt requsted lambda 0.95 on low loads  (Read 1945 times)
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« on: May 03, 2022, 10:00:39 AM »

Hi. I have deleted sai and 2nd lambda. Also zeroed FKHABMN. After acceleration when i lift off gas pedal my requsted lambda goes 0.95. I logged different variables and there is lambda 1, like lamfa bts kr etc. Is it cat heating? Any ideas?
Logged
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #1 on: May 04, 2022, 09:58:22 AM »

Anyone?
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #2 on: May 04, 2022, 10:51:02 AM »

Look at the FR, what effects req lambda.
Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1456


mk4 1.8T AUM


« Reply #3 on: May 04, 2022, 11:20:54 AM »

Is that irrelevant due to overrun cutoff? Roll Eyes
Logged
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #4 on: May 04, 2022, 12:32:22 PM »

At 65 seconds u can see it in log. Its not actually overrun.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #5 on: May 04, 2022, 12:54:01 PM »

Is that irrelevant due to overrun cutoff? Roll Eyes

it would be but we have to believe his word until the log is posted Smiley

Regardless log injector mask cutoff, to see if you are actually injecting or not... else it doesnt really matter req lambda is.
Logged
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #6 on: May 04, 2022, 01:06:11 PM »

Actual lambda follows requsted. There is incjection.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)