NefMoto > Technical > Flashing and Chipping > MED17.5 OBD The data could not be written
Pages: [1]
« previous next »
Author Topic: MED17.5 OBD The data could not be written  (Read 3474 times)
liuxiangqing858
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« on: May 10, 2022, 08:36:47 AM »
I tuned my car about thirty times using pcmflash OBD, but suddenly I couldn't write, I couldn't use autotuner to try the bench way, ODIS couldn't refresh, and currently I could only read and write through ktag. Sorry, my English is very poor and can only be communicated through translation software. Can someone give some advice? Thank you very much.
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070
« Reply #1 on: May 10, 2022, 08:49:45 AM »
thirty or 99 times? show us your flash counter Cheesy
Logged
I have no logs because I have a boost gauge (makes things easier)
liuxiangqing858
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #2 on: May 10, 2022, 09:13:23 AM »
Quote from: IamwhoIam on May 10, 2022, 08:49:45 AM
thirty or 99 times? show us your flash counter Cheesy
Is it a limit of 99 times? I noticed that when I write once with PCM, it will produce two records. Now I have 60 records, so I infer that I wrote 30 times. I can also confirm the specific write times tomorrow. It's early morning here.
Logged
xXxCryxXx
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 157
« Reply #3 on: May 10, 2022, 09:44:01 AM »
Quote from: liuxiangqing858 on May 10, 2022, 08:36:47 AM
I tuned my car about thirty times using pcmflash OBD, but suddenly I couldn't write, I couldn't use autotuner to try the bench way, ODIS couldn't refresh, and currently I could only read and write through ktag. Sorry, my English is very poor and can only be communicated through translation software. Can someone give some advice? Thank you very much.
Is that tuned before? If yes maybe there is an obd2 block of reading & writing data from the tuner it self i do that to for some Costumer so you will need a boot read… did you tune it by your self? Or is it from a tuner that file?


Gesendet von iPhone mit Tapatalk
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #4 on: May 10, 2022, 11:42:53 AM »
Flash counter full. PCMFlash does a full flash incl. unlock each and every time and does not freeze the flash counter either.
Bench or boot will work, and you need to reset the counter.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
xXxCryxXx
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 157
« Reply #5 on: May 10, 2022, 01:18:20 PM »
Quote from: prj on May 10, 2022, 11:42:53 AM
Flash counter full. PCMFlash does a full flash incl. unlock each and every time and does not freeze the flash counter either.
Bench or boot will work, and you need to reset the counter.
OBD2 lock is also possible Smiley


Gesendet von iPhone mit Tapatalk
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #6 on: May 10, 2022, 01:19:45 PM »
Quote from: xXxCryxXx on May 10, 2022, 01:18:20 PM
OBD2 lock is also possible Smiley


Gesendet von iPhone mit Tapatalk

You know what else is possible? That you can't read for shit.
Read the first post again where he said that he wrote it by OBD 30+ times.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
xXxCryxXx
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 157
« Reply #7 on: May 10, 2022, 01:22:05 PM »
Quote from: prj on May 10, 2022, 01:19:45 PM
You know what else is possible? That you can't read for shit.
Read the first post again where he said that he wrote it by OBD 30+ times.
Oh yes sorry ☹️ you are right my fault


Gesendet von iPhone mit Tapatalk
Logged
liuxiangqing858
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #8 on: May 10, 2022, 04:41:38 PM »
Quote from: prj on May 10, 2022, 11:42:53 AM
Flash counter full. PCMFlash does a full flash incl. unlock each and every time and does not freeze the flash counter either.
Bench or boot will work, and you need to reset the counter.
What should I do to reset him.
Logged
liuxiangqing858
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #9 on: May 10, 2022, 04:43:39 PM »
Quote from: xXxCryxXx on May 10, 2022, 09:44:01 AM
Is that tuned before? If yes maybe there is an obd2 block of reading & writing data from the tuner it self i do that to for some Costumer so you will need a boot read… did you tune it by your self? Or is it from a tuner that file?


Gesendet von iPhone mit Tapatalk
I made the adjustment myself 30 times, but it's been a long time, from stage 1 stage2. stage3。
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #10 on: May 11, 2022, 12:06:05 PM »
Look at your flash counter, then look at your eeprom.
Figure out where it is, zero it, write the eeprom back.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 04:30:37 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 15 queries. (Pretty URLs adds 0s, 0q)